Harman AVR 2600 owner manual System Settings, General AVR Settings

Page 42

ADVANCED FUNCTIONS

Convergence and Edge Focus

The crosshatch pattern that may surround the test screen may be used to evaluate edge focus and convergence in front- or rear- projection video displays. If you are unable to improve the picture using the available controls, contact the video display manufacturer’s authorized service representative for assistance.

When you have finished making any video adjustments, press the Back/Exit Button.

MULTIZONE OPERATION

With the multizone system in use, you may enjoy an exciting

5.1-channel home theater presentation in the main listening area, while others listen to the same materials or an entirely different presentation in another room.

Although installation of a multizone system is not complicated, it requires running wires inside walls. Check your local building codes and comply with the requirements for in-wall wiring systems, to prevent the possibility of a dangerous situation. If you have any questions about installing a multizone system, it is strongly recom- mended that you contact a professional custom installer. See Step Nine of the Installation section on page 23 for instructions on installing a multizone system.

Volume: The volume is controlled separately for the remote zone.

Surround Back Amps: Informational only. Automatically reassigns the surround back channels to the multizone system when the multizone system is turned on. When this line is set to Zone 2, you may only configure the main listening room for up to

5.1channels. Since the EzSet/EQ process will only configure the main system, use the Manual Setup section of the Speaker Setup menu to configure the remote speakers with the Status setting off, then turn the Status setting on.

To operate the multizone system using the main remote, slide the Zone Select Switch at the bottom of the remote to the “2” position. To select a zone using the Zone 2 remote, press the Zone Selector, and the Zone Indicator will turn green when the remote is set to operate Zone 1, or red to operate Zone 2.

SYSTEM SETTINGS

The AVR 2600 offers system settings for ease of use. These settings may be accessed from the System Settings menu, which is selected by pressing the Setup Button and navigating to the System line. Press the OK Button to display the System Settings menu. See Figure 40.

Operating the Multizone System

The AVR 2600’s multizone system is accessed using the on-screen Zone 2 menu. Press the Setup Button, and use the 5/1 Buttons to navigate to the Zone 2 line. Press the OK Button to display the Zone 2 menu. See Figure 39.

Figure 39 – Zone 2 Menu

Status: Turns the multizone system on or off. When no one is listening in the remote room, leave this setting at the default of OFF.

Source: Indicates the source input for the remote zone. You may select a different source from the main listening area. However, if the same source has been selected for both the main listening area and the remote zone, listeners in both areas will hear the same content.

NOTE: Only analog audio sources, including The Bridge III, are available to the multizone system. To hear digital devices, such as a CD player, in the remote zone, follow these steps:

1.In addition to a digital audio connection, connect the source device’s analog audio outputs to the AVR. Make a note in Table A5 in the appendix which set of inputs was used.

2.In the Info Settings menu, leave the Audio Input From Source setting at the digital audio input. Scroll down to the Zone 2 Audio setting and select the analog audio input.

Figure 40 – Systems Settings Screen

Front-Panel Dimmer: Select On 100% for full brightness, dim to 50% or 25% of full brightness or select Off to fully darken the display. The light inside the Volume Control will go out when the display is partly or fully dimmed, but the Power Indicator will always remain lit to remind you that the AVR is powered on.

General AVR Settings

Volume Units: Select whether volume is displayed in the conventional decibel scale or on a numeric scale from 0 to 90. When the decibel scale is used, 0dB is the maximum recommended volume, with lower volumes displayed as negative values.

Volume Default and Volume Default Level: These two settings are used together to program the volume level at turn-on. Turn Volume Default on, and then set the Volume Default Level to the desired turn-on volume. When the Volume Default setting is left off, the AVR will play at the last-used volume setting from the previ- ous listening session.

Unit of Measure: Adjusts the speaker-distance settings for Manual Speaker Setup. Select between meters and feet.

Language: Select the preferred language for the AVR’s on-screen

menus and displays: English, French, Spanish, German, Italian or Russian.

42

Page 41 Page 43
Image 42
Page 41 Page 43
Contents AVR Service Instructions Outdoor Use Marking Safety InformationImportant Safety Instructions Wet Location MarkingImportant Safety Information UnpackingTable of Contents Introduction Surround ModesAudio/Video Inputs Supplied AccessoriesAudio Inputs Digital Audio InputsFront PanelControls On When the AVR is turned on, this LED turns white Volume Knob Turn this knob to raise or lower the volumeFRONT-PANEL Controls Connections RearREAR-PANEL Connections Use an HDMI-to-DVI adapterAlways make a separate audio connection AM and FM Antenna Terminals Connect the included Main Remote Control Functions AVR Power Off Button Press to turn off the AVR Surround Modes Press to directly access the SurroundMain Remote Control Functions Introduction to Home Theater Typical Home Theater SystemMultichannel Audio Subwoofer Connecting Source Devices to the AVRSpeaker Connections Audio ConnectionsDigital Video Video ConnectionsAnalog Audio Analog VideoAntennas USB PortPlacement of Surround Speakers in a 5.1-Channel System Speaker PlacementFront Speaker Placement Subwoofer PlacementGetting Started Source Assignment WorksheetGame Media Server Getting Started Installation Plug the AC Power cord into an unswitched AC outlet Step Nine Install a Multizone SystemStep TEN Plug in AC Power Cords Step SIX Connect AM AntennaStep Twelve Program Sources Into the Remote Step Thirteen Turn On the AVRTwo steps are required the first time you turn on the AVR Initial Setup Using the ON-SCREEN Menu SystemConfigure the AVR 2600, Using EzSet/EQ Technology Set Up Sources Audio and Video Input SelectionChannel Inputs You are now ready to begin enjoying your new receiver Dolby Volume Calibration Offset Volume ControlDolby Volume OperationUsing the Radio Sleep TimerHeadphones Mute FunctionSirius Satellite Radio Operation RecordingRemote Control Key Using Docking StationUsing The Bridge Previous TrackPlay Pause Menu Back/Exit or Left Arrow Select IPod Manual ModeSelecting a Surround Mode Right ArrowOperation Advanced Functions Analog Audio SignalsDigital Audio Signals Audio Processing and Surround SoundDolby Surround Settings Manual Speaker SetupVideo Game Logic 7 Game Step TWO Measure Speaker Distances Step Three Manual Setup MenuStep ONE Determine Speaker Crossover Number of SpeakersAdjust Crossover Frequencies Menu Adjust Speaker Distance MenuSub Mode Step Four Setting Channel Output Levels Manually Video AdjustmentsVideo Modes Video Modes MenuBrightness Adjustment System Settings General AVR SettingsSystem Information Advanced Remote Control FunctionsMenu Appearance Punch-Through ProgrammingMemory Resetting the RemoteProcessor Reset To program, or record an activity, follow these stepsTroubleshooting Guide Symptom Cause SolutionTable A2 Source Setting Defaults AppendixTable A1 Recommended Source Component Connections All Digital and 2-Channel Your Settings Analog Audio Inputs Table A3 Speaker/Channel Setting DefaultsTable A4 Delay Setting Defaults PositionDefault Table A5 Source SettingsTable A6 Audio Effects Settings Media Server Radio GameTable A8 Surround Modes Table A7 Video Modes SettingsBlack Level Off Deinterlacing Film Mode Detect Auto SelectTable A9 Remote Control Codes Table A10 System SettingsTable A11 Zone 2 Settings Surround Mode Description Incoming Bitstream or Signal Table A12 Surround ModesTable A12 Channel Stereo DTS 2/2/.0 or .1, 3/2/.0 orChannel music recordings Center speaker plays a summed mono mix36 37 38 40 41 Table A13 Remote Control Function List RadioTable A13 AUXTable A14 Remote Control Product Codes TV Table A15 Remote Control Product Codes AUX-HDTV Table A16 Remote Control Product Codes AUX-VCRTable A16 VCR Table A17 Remote Control Product Codes AUX-CD Table A18 Remote Control Product Codes DVDTable A17 CD Table A19 Remote Control Product Codes SAT Table A20 Remote Control Product Codes GameTable A21 Remote Control Product Codes Cable Table A24 Remote Control Product Codes AUX- TiVo Table A22 Remote Control Product Codes Media ServerTable A21 Cable AVR 2600 Technical Specifications Audio Section

AVR 2600 specifications

The Harman AVR 2600 is a feature-rich audio-video receiver designed to elevate your home entertainment experience. As part of Harman's renowned line of audio products, the AVR 2600 seamlessly combines advanced technology with user-friendly design, making it a popular choice for audiophiles and casual listeners alike.

One of the standout features of the AVR 2600 is its robust power output. With a rated 7.1 channel amplifier, it delivers a powerful and immersive sound experience. Each channel produces a significant amount of wattage, ensuring that your movies, music, and games sound spectacular and enveloping. This power enables the AVR 2600 to drive a variety of speaker configurations, allowing users to customize their sound setup according to their preferences.

In terms of connectivity, the Harman AVR 2600 boasts multiple HDMI inputs and outputs, supporting the latest video formats, including 4K. This allows users to connect multiple devices, such as gaming consoles, Blu-ray players, and streaming devices, all while maintaining a simple and clutter-free setup. The receiver also features built-in Bluetooth technology, enabling wireless streaming of music from smartphones, tablets, and other compatible devices. This versatility enhances the overall user experience, making it easy to access your favorite content.

The AVR 2600 also incorporates advanced audio processing technologies. With support for popular surround sound formats like Dolby Atmos and DTS:X, users can experience cinematic sound quality right in their living rooms. These technologies provide a three-dimensional audio experience, enhancing the immersion when watching movies or playing video games.

Another significant characteristic of the AVR 2600 is its user-friendly interface. Navigating the receiver is straightforward, thanks to the on-screen setup and intuitive remote control. The built-in setup assistant guides users through the calibration process, allowing for optimal speaker placement and sound adjustment based on the room's acoustics.

In conclusion, the Harman AVR 2600 is a powerful and versatile audio-video receiver that combines high-quality sound, advanced connectivity options, and user-friendly features. Whether you're looking to create the ultimate home theater experience or simply elevate your music listening, the AVR 2600 is an excellent choice that meets a wide range of entertainment needs.
Top Page Image Contents