Setting the Trimming
You can trim the image and print only the trimmed portion as if the image was recomposed.
Do the trimming right before printing. If you set the trimming and then set the print settings, you may have to set the trimming again.
1
2
Select [Trimming].
Turn the <5> dial to select
[Trimming], then press <0>.
XThe trimming screen will appear.
Trim the image.
The image area within the trimming frame will be printed.
The operation guide disappears while you trim the image. It will reappear after 5 sec. of idle time.
Changing the trimming frame size
When you press the <u> or <I> button, the size of the trimming frame will change. The smaller the trimming frame, the larger the image magnification will be.
Moving the trimming frame
Use <9> to scroll around the image in any direction. Move the trimming frame until it shows the desired image area or composition.
Rotating the frame
The <B> button toggles between the vertical and horizontal orientation of the trimming frame. For example, a horizontal shot can be printed as a vertical shot.
136