wPrinting with PictBridge
5 Start printing.
Turn the <5> dial to select [Print], then press <0>.
XThe printing will start.
When the printing ends, the screen will return to step 1.
To stop the printing, press <0> while [Stop] is displayed, then turn the <5> dial to select [OK] and press <0>.
Depending on the image’s file size and recording quality, it may take some time for the printing to start after you select [Print].
The [Default] setting for printing effects and other options are the printer’s own default settings as set by the printer’s manufacturer. See the printer’s instruction manual to find out what the [Default] settings are.
Handling Printer Errors
If you resolve a printer error (no ink, no paper, etc.) and select [Continue] to resume printing but it does not resume, operate the buttons on the printer to resume printing. For details, see the printer’s instruction manual.
Error Messages
If a problem occurs during printing, an error message will appear on the camera’s LCD monitor. Press <0> to stop printing. After resolving the problem, resume printing. For details on how to resolve a printing problem, refer to the printer’s instruction manual.
Paper Error
Check whether the paper is properly loaded in the printer.
Ink Error
The printer has run out of ink or the waste ink tank is full.
Hardware Error
Check for any printer problems other than paper and ink problems.
File Error
The selected image cannot be printed via PictBridge. Images taken with a different camera or images edited with a computer might not be printable.
129