Replacing the Date/Time Battery

The date/time (back-up) battery maintains the camera’s date and time. The battery’s service life is about 5 years. If the date/time is reset when the battery is replaced, replace the back-up battery with a new CR2016 lithium battery as described below.

The date/time setting will also be reset, so you must set the correct date/time.

1Turn the <4> switch to <2>.

2 Unscrewscrew. the battery holder

Use a small Philips screwdriver.

Be careful not to lose the screw.

3 Take off the battery holder. Push out the battery in direction 2.

4 Replaceholder. the battery in the battery

Make sure the battery is in the proper + – orientation.

5 Tighten the battery holder screw.

For the date/time battery, be sure to use a CR2016 lithium battery.

41