3Custom Function SettingsN

C.Fn-10 Superimposed display

0:On

1:Off

The AF point in the viewfinder will not flash in red. Recommended when it is bothersome to see it light up.

The AF point will still light when you select it.

C.Fn-11 Menu button display position

When you press the <M> button, you can set the menu screen setting.

0:Previous (top if power off)

Displays the preceding menu screen that was used. Note that the top menu screen [Quality] will be displayed instead when the <4> switch is turned <2>.

1:Previous

Displays the preceding menu screen that was used.

2:Top

Always displays the top menu screen [Quality].

C.Fn-12 Mirror lockup

0:Disable

1:Enable

Effective for close-up and telephoto shots to prevent camera shake caused by the mirror’s reflex action. See page 97 for the mirror lockup procedure.

C.Fn-13 AF point selection method

0:Normal

Press the <S> button and use <9> to select the AF point.

1:Multi-controller direct

Without pressing the <S> button first, you can just use the <9> to select the desired AF point. Pressing the <S> button will set it to automatic AF point selection.

2:Quick Control Dial direct

Without pressing the <S> button first, you can just use the <5> dial to select an AF point directly. By holding down the <S> button and turning the <6> dial, you can set the exposure compensation.

154