qSelecting the Metering ModeN

Four metering modes are provided: Evaluative, partial, spot, and center-weighted average metering. In the <1> (Full Auto) mode, evaluative metering is set automatically.

1

2

Press the <Q> button. (9)

Select the metering mode.

While looking at the LCD panel, turn the <6> dial.

q: Evaluative Metering

w: Partial Metering

r: Spot Metering

e: Center-weighted Average Metering

qEvaluative Metering

This is the camera’s standard metering mode suited for most subjects even under backlit conditions. After detecting the main subject’s position, brightness, background, front and back lighting, etc., the camera sets the proper exposure.

wPartial Metering

Effective when the background is much brighter than the subject due to backlighting, etc. Partial metering covers about 8% of the viewfinder area at the center. The area covered by partial metering is shown on the left.

rSpot Metering

This is for metering a specific part of the subject or scene. The metering is weighted at the center covering about 3.5% of the viewfinder area. The area covered by spot metering is shown on the left.

eCenter-weighted Average Metering

The metering is weighted at the center and then averaged for the entire scene.

81