Installing and Removing the Battery

Installing the Battery

Load a fully charged BP-511A battery pack into the camera.

1Open the battery compartment cover.

Slide the lever as shown by the arrow and open the cover.

2 Insert the battery.

Point the battery contacts downward. Insert the battery until it locks into place.

3 Close the cover.

Press the cover until it snaps shut.

Battery Pack BP-514, BP-511, or BP-512 can also be used.

Checking the Battery Level

When the <4> switch is set to <1> or <J> (p.30), the battery level will be indicated at one of four levels.

z : Battery level OK.

x : Battery level is low.

b n

:Battery will be exhausted soon.

:Battery must be recharged.

24