3Print Ordering

Selecting All images

The print order can also be set or canceled for all the images in the CF card. For standard-type prints, a quantity of one will be ordered for all the images.

Note that after following the “Selecting Individual Images” procedure, if you do the “Selecting All Images” procedure, the print order will change to “All images.”

1

2

Select [All].

Turn the <5> dial to select [All], then press <0>.

XThe All screen will appear.

Select [Mark all].

Turn the <5> dial to select [Mark all], then press <0>.

XOne print each will be specified for all the images, then the print order screen will reappear.

If you select [Clear all], all the images selected for printing will be deselected. If you select [Cancel], the print order screen will reappear.

3Exit the menu.

On the Print Order screen, press the <M> button.

XThe settings will be saved to the CF card, and the menu will reappear.

Note that RAW images cannot be selected for printing even when you set “Mark all.”

When using a PictBridge printer, print no more than 500 images for one print order. If you specify more than this, all the selected images might not be printed.

144