Preparing to Print
wPictBridge
ACP Direct
SBubble Jet Direct
6Playback the image.
Press the <x> button.
XThe image and the printer icon <w>, <A>, or <S> indicating a printer connection will be displayed.
XThe <l> button lamp will light in blue.
The procedure will be different depending on the icon displayed. See the applicable pages below.
Icon | Reference pages |
w126 - 129, 138
A130 - 132, 138
S133 - 135, 138
RAW images are not compatible with direct printing.
If you use a battery to power the camera, make sure it is fully charged. During direct printing, keep checking the battery level.
If there is a long beeping sound in step 5, it indicates a problem with the PictBridge printer. To find out what’s wrong, do the following:
Press the <x> button to playback the image and follow the steps below.
1.Press <0>.
2.On the print setting screen, select [Print].
The error message will be displayed on the LCD monitor. See “Error Messages” on page 129.
Before disconnecting the cable, turn off the camera and printer. Pull out the cable while holding the plug, not the cord.
When connecting the camera to the printer, do not use any cable other than the dedicated interface cable.
Do not disconnect the cable during direct printing.
125