dProgram AE

If “30"” and the maximum aperture blink, it indicates underexposure. Increase the ISO speed or use flash. If “8000” and the minimum aperture blink, it indicates overexposure. Decrease the ISO speed or use an ND filter (optional) to reduce the amount of light entering the lens.

Differences Between <d> and <1> (Full Auto)

In both modes, the automatically-set shutter speed and aperture combination are the same.

In the <d> mode, you can set or use the functions below, but not in the <1> mode.

Shooting Settings

AF mode selection AF point selection Drive mode selection ISO speed

Metering mode selection Program Shift Exposure compensation

AEB

AE lock with <A> button Depth-of-field preview Register camera settings Clear registered camera set. Clear all camera settings Custom Function (C.Fn) Clear all Custom Functions Sensor cleaning

Flash Settings (EX-series Speedlite)

Manual/stroboscopic flash High-speed sync (FP flash) FE lock

Flash ratio control

Flash exposure compensation

FEB 2nd-curtain sync Modeling flash

Image-Recording Settings

RAW and RAW+JPEG selection Picture Style selection/customize/registration White balance selection Custom white balance selection White balance correction

WB bracketing

Color temperature setting Color space selection

About Program Shift

In Program AE mode, you can freely change the shutter speed and aperture value combination (program) set by the camera while maintaining the same exposure value. This is called program shift.

To do this, press the shutter button down halfway, then turn the <6> dial until the desired shutter speed or aperture value is displayed. Program shift is canceled automatically after the image is captured.

If you use a flash, you cannot use program shift.

85