Canon 1000 HS, SD4500 IS Remove the cover, Insert the battery, Charge the battery, Remove the battery, Charging the Battery

Charging the Battery

Use the included charger to charge the battery. Be sure to charge the battery as it is not charged at the time of purchase.

Remove the cover.Insert the battery.

● Align the o marks on the battery and charger, then insert the battery by sliding it in ( ) and down ( ).

Charge the battery.

● For CB-2LB:Flip out the plug ( ) and plug the charger into a power outlet ( ).

● For CB-2LBE:lug the power cord into

		the charger, then plug the other end into a
	B-2LB	power outlet.
		XThe charge lamp lights orange and
CB-2LBE		charging starts.
		XThe charge lamp will light green when
		charging has finished. Charging takes
		approx. 1 hour and 50 minutes.
		Remove the battery.

● Unplug the battery charger from the power outlet, then remove the battery by sliding it in ( ) and up ( ).

To protect the battery and prolong its life, do not charge it for longer than 24 hours continuously.

14