Scanning an Image
Note:
You must set the IP address for your Network Image Express Card before you can scan using it. See "Starting EPSON Scan Settings" on page 130 for instructions.
1.Turn on your scanner and the client computer.
2.On the client computer,
3.Select your desired mode and scanning settings, then do one of the following to start your scan:
❏Click the Scan button on the EPSON Scan window.
❏Press the a Start button on the scanner
Note:
In a network environment, the a Start button on the scanner works the same way as clicking the Scan button in the EPSON Scan window.
7
7
7
7
7
7
7
7
7
7
7
7
Using the Optional Network Image Express Card | 135 |