❏The AC power cord should be placed to avoid abrasions, cuts, fraying, crimping, and kinking. Do not place objects on top of the AC power cord and do not allow the AC adapter or the AC power cord to be stepped on or run over. Be particularly careful to keep all the AC power cords straight at the ends and the points where they enter and leave the AC adapter.
❏Use only the AC adapter model A371B/A311E that comes with your scanner. Using any other adapter could cause fire, electrical shock, or injury.
❏The AC adapter is designed for use with the scanner with which it was included. Do not attempt to use it with other electronic devices unless specified.
❏Use only the type of power source indicated on the AC adapter’s label, and always supply power directly from a standard domestic electrical outlet with the AC power cord that meets the relevant local safety standards.
❏When connecting this product to a computer or other device with a cable, ensure the correct orientation of the connectors. Each connector has only one correct orientation. Inserting a connector in the wrong orientation may damage both devices connected by the cable.
❏Avoid using outlets on the same circuit as photocopiers or air control systems that regularly switch on and off.
❏If you use an extension cord with the scanner, make sure the total ampere rating of the devices plugged into the extension cord does not exceed the cord’s ampere rating. Also, make sure the total ampere rating of all devices plugged into the electrical outlet does not exceed the electrical outlet’s ampere rating. Do not place multiple loads on the electrical outlet.
Safety Instructions | 9 |