3.Check the lights on the Network Image Express Card. Initialization is in progress while the red status light and the green data light are on. When the yellow status light comes on, initialization is complete.

Setting Up Client Computers for Network Scanning

To allow networking, you must install a Network Interface Card and a Network Interface Card (NIC) driver on each client computer in the network. See the documentation that came with the card for instructions.

Then follow the instructions in this section to set up the TCP/IP protocol on the client computers.

Installing the TCP/IP Protocol

Windows XP or 2000

Note:

The screen shots in this section show Windows 2000, however the instructions are the same for Windows XP, except as noted.

7

7

7

7

7

7

7

7

7

7

7

7

Using the Optional Network Image Express Card

123