Connecting the Card and Scanner to a Network Hub

1.Connect an Ethernet cable (Category 5 shielded twisted-pair cable) to the RJ-45 connector on the Network Image Express Card and connect the other end to your network hub.

cCaution:

❏You must use a Category 5 shielded twisted-pair cable to connect the Network Image Express Card to prevent a malfunction.

❏Do not connect the Network Image Express Card directly to a computer; connect it only to a network hub.

❏Do not connect or disconnect the network cable when the scanner is turned on.

❏Do not connect the USB cable while an Ethernet cable is already connected to the RJ-45 connector on the Network Image Express Card.

2.Turn on the scanner.

122Using the Optional Network Image Express Card