Samsung DVD-D530 Connections, Choosing a Connection

1.DVD POWER Button Turns the power on or off.

2.DVD Button

(Only DVD-D530K/D530)

Use to select the DVD player for operation.

3.TV Button

(Only DVD-D530K/D530)

Use to select a Samsung TV for operation.

4.EZ VIEW Button

(Only DVD-D530K/D530)

Lets you easily adjust the aspect ratio of a picture according to the screen size of your TV (16:9 or 4:3).

5.MARKER Button

6.REPEAT Button

Allows you to repeat play a title, chapter, track, or disc.

7.DISC MENU Button Brings up the Disc menu.

8.RECORD Button

(Only DVD-D530K/D360K) Use to Karaoke recording.

9.TV VOL (+, -) Buttons (Only DVD-D530K/D530) Controls volume.

10.SKIP Buttons (/ )

Use to skip the title, chapter or track.

11.STOP Button ( )

12.MENU Button

Brings up the DVD player’s menu.

13.ENTER/π/†,√/® Buttons This button functions as a toggle switch.

14.TOOLS Button

Displays the current disc mode. It also lets you access the Display function.

15.OPEN/CLOSE ( ) Button To open and close the disc tray.

16.HDMI SEL. Button

(Only DVD-D530K/D530)

HDMI Output resolution setup.

17.USB Button

18.VIDEO SEL. Button Changes video output mode.

19.REPEAT A-B Button (Only DVD-D530K/D530)

Allows you to repeat play a chosen section (A-B) on a disc.

20.INFO Button

Used to displays playback info banner.

21.TITLE MENU Button Brings up the Title menu.

22.AUDIO/TV SOURCE Button Use this button to access various audio functions on a disc. Use this button to select an available TV source (mode TV).

23.PAUSE Button () (Only DVD-D530K/D530) Pauses disc play.

24.SEARCH Buttons ( / ) Allows you to search forward/backward through a disc.

25.TV CH (, ) Buttons (Only DVD-D530K/D530) Channel selection.

26.PLAY Button ( )/( ) Begins disc play.

27.RETURN Button Returns to a previous menu.

28.SUBTITLE/(π) Button

29.EXIT Button

(Only DVD-D530K/D530) Exits the on-screen menu.

30.KARAOKE (†) Button (Only DVD-D530K/D360K)

To access karaoke menu (Keycon, mic vol- ume, Echo).

A. Connecting to a TV (For Video)

1.Using video/audio cables, connect the VIDEO (yellow)/AUDIO (red and white) OUT terminals on the rear of the DVD player to the VIDEO (yellow)/AUDIO (red and white) IN terminals of TV.

2.Turn on the DVD player and TV.

3.Press the input selector on your TV remote control until the Video signal from the DVD player appears on the TV screen.

Note

-Noise may be generated if the audio cable is too close to the power cable.

-If you want to connect to an Amplifier, please refer to the Amplifier connection page.

-The number and position of terminals can vary depending on your TV set. Please refer to the user’s manual of the TV.

-If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of the DVD player.

-If you press the VIDEO SEL. button when DVD Player is in stop mode or no disc is inserted, the Video Output mode changes in the following sequence: (I-SCAN ➝ P-SCAN)

B. Connection to a TV (Interlace/Progressive)

1.Using component video cables, connect the COMPONENT VIDEO OUT terminal on the rear of the DVD player to the COMPONENT IN terminal of TV.

2.Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of TV. Turn on the DVD player and TV.

3.Press the input selector on your TV remote control until the Component signal from the DVD player appears on the TV screen.

4.Set the Video Output to I-SCAN/P-SCANin the Display Setup menu. You can use the VIDEO SEL. button to change the Video Output mode.

Note

-What is “Progressive Scan”?

Progressive scan has twice as many scanning lines as the interlace output method has. Progressive scanning method can provide better and clearer picture quality.

C. Connecting to a TV with DVI/HDMI Jack (ONLY DVD-D530K/D530)

1. Using the HDMI-DVI/HDMI-HDMI cable , connect the HDMI OUT terminal on the rear of the DVD

player to the DVI/HDMI IN terminal of your TV.

Connections

Choosing a Connection

The following shows examples of connections commonly used to connect the DVD player with a TV and other components.

Before Connecting the DVD Player

-Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.

-Refer to the user’s manual of the additional components you are connecting for more information on those particular components.

2.	Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD
	player to the AUDIO (red and white) IN terminals of your TV. Turn on the DVD player and TV.
3.	Press the input selector on your TV remote control until the DVI/HDMI signal from the DVD player
	appears on your TV screen.

HDMI VIDEO Specifications (ONLY DVD-D530K/D530)

When you press the HDMI SEL. button, 480p, 576p, 720p, 1080p, 1080i are selected in order. The first press of the HDMI SEL. button brings up the current resolution.

The second press allows you to change the HDMI output resolution.

-Depending on your TV, certain HDMI output resolutions may not work.

-Please refer to the user’s manual of your TV.

-If HDMI or HDMI-DVI cable is plugged into TV, the DVD player’s output is set to HDMI/DVI within 10 seconds.

4