1 With the unit in Stop mode, press the P.SCAN button on the front of the HDD & DVD RECORDER.
The message “Press [Yes] to confirm Progressive scan mode. Otherwise, press [No].” will appear. Press the œ √ buttons to select Yes, and then press the OK button.
Press [Yes] to confirm Progressive scan mode.
Otherwise, press [No].
Yes No
| The message “Please, set your TV to Progressive |
System Setup | 2 input. To deactivate, press [STOP] key.” will |
appear. Press the OK button. | |
|
Please, set your TV to Progressive input.
To deactivate, press [STOP] key.
OK
3 | The message “Video Output Mode Progressive |
Scan” will appear. |
The video will now be Progressive Scan.
Video Output Mode
Progressive Scan.
■If the P.SCAN button on the HDD & DVD RECORDER’s front panel is pressed
NOTE
during playback, the message “This function is possible only on stop mode” appears on the screen.
■Progressive setting is only available when the HDD & DVD RECORDER is in stop mode.
Canceling the
Progressive scan
1 | With the unit in Stop mode, press the P.SCAN button |
on the front of the HDD & DVD RECORDER. |
The message “Press [Yes] to confirm Interlace scan mode. Otherwise, press [No].” will appear. Press the œ √ buttons to select Yes, and then press the OK button.
Press [Yes] to confirm Interlace scan mode.
Otherwise, press [No]
Yes No
2 The message “Please, set your TV to Interlace input. To deactivate, press [STOP] key.” will appear. Press the OK button.
Please, set your TV to Interlace input.
To deactivate, press [STOP] key.
OK
3 The message “Video Output Mode Interlace Scan” will appear.
Video Output Mode
Interlace Scan.