Multi slide show ()
Images can be displayed continuously at
Selecting Images
Start the multi slide show
The multi slide show can start only in the [Show] menu.1.Use the Up / Down buttons to select the [Image] menu and press the Right button.
2.Select a desired sub menu by pressing the Up / Down button.[All] | : All images saved in the Memory |
| are played back. |
MULTI SLIDE SHOW
Show
ImagesAll
EffectDate
IntervalSelect
Music
BackSet
1.Use the Up / Down buttons to select the [Show] menu and press the Right button.
2.Select a desired sub menu by pressing the Up / Down button.
[Play] | : The multi slide show is |
| closed after one cycle. |
MULTI SLIDE SHOW
ShowPlay
Images | Repeat Play |
Effect
Interval
Music
BackSet
[Date] : Images taken in a specified date are played back. Press the Right button and choose the date.
[Select] : Play only the selected images. If you press the Right button, you can select the desired images to play back. The selected image can be saved as [Select1], [Select2] and [Select3]. If you save the selected image with the [New Select] command, it will be saved as [Select1]. But when a new image is saved
-To pause the multi slide shown while playing it back, press the play & pause() button again.
-Pressing the play & pause() button again will cause the multi slide show restart.
-To stop playback of the multi slide show, press theplay & pause() button, and then press the MENU / OK button.
again using [New Select], the former image which had been saved as [Select1] will be saved as [Select2] automatically. You can change and cancel the images which were saved as [Select1], [Select2] and [Select3].
3.Press the OK button and the settings are saved.4.Select [Play] or [Repeat Play] in the [Show] menu to start the multi slide show.
62