DISPLAY (
Quick view
If you enable Quick View before capturing an image, you can view the image you just captured on the LCD monitor for the duration set in the [Quick View] setup. Quick view is possible only with still images.
SETTINGS ()
Formatting a memory
This is used for formatting the memory. If you run [Format] on the memory, all images, including the protected images, will be deleted. Be sure to download important images to your PC before formatting the memory.
| - Sub menus |
|
[Off] | : The quick view function |
| can’t be activated. |
[0.5, 1, 3 sec] : The captured image is briefly displayed during the selected time.
|
|
|
|
DISPLAY |
| ||
Language |
| ||
Date & Time |
| ||
Start Image | Off | ||
LCD Bright | 0.5sec | ||
Quick View | 1sec | ||
LCD Save | 3sec | ||
|
| Back | Set |
|
|
|
|
[No] : The memory will not be formatted.
[Yes] : A window is displayed to confirm the selection. Select the [Yes] menu. A [Processing!] message appears and the memory will be formatted. If you run FORMAT in Play mode, a [No Image!] message will appear.
SETTINGS
FormatNo
ResetYes
File
Imprint
Power Off
Video Out
Back | Set |
LCD save
If you set the [LCD save] to On and the camera isn’t operated during the specified time, the LCD monitor will be turned off automatically.
-Sub menus
[Off] : The LCD monitor will not be turned off.[On] : If the camera isn’t operated during the specified time (about 30 SEC.), the camera power will be idle (Camera status lamp:Blinking) automatically.
DISPLAY
Language
Date & Time
Start Image
LCD Bright
Quick View | Off |
LCD Save | On |
Back | Set |
-A memory card that has a file this camera can’t recognise or one that has been taken from another camera.
-Always format the memory card using this camera. If you insert a memory card that has been formatted using other cameras, memory card readers, or PCs, you will get a [Card Error!] message.
75