Samsung L210 SAMSUNG L210 System Requirements, About the software, For Windows, For Macintosh, USB port, USB port, disk space, Mac OS 10.0, CD-ROMdrive, CD-ROMdrive, Minimum 64MB RAM

System Requirements

For Windows	For Macintosh
PC with processor better than
Pentium II 450MHz	Power Mac G3 or later
(Pentium 800MHz recommended)
Windows 98SE/2000/ME/XP/Vista	Mac OS 10.0 ~ 10.4
Minimum 128MB RAM	Minimum 64MB RAM
(Over 512MB recommended)
	110MB of available hard-
200MB of available hard disk space
	disk space
(Over 1GB recommend)
USB port	USB port
CD-ROM drive	CD-ROM drive
1024x768 pixels, 16bit color display
compatible monitor	MPlayer (For movie)
(24bit color display recommended)
MicroSoft DirectX 9.0C

About the software

After inserting the CD-ROM provided with this camera into the CD-ROM drive, the following window should automatically run.

Before connecting the camera to the PC, you should first install the camera driver.

￿Camera driver : This enables images to transfer between the camera and PC.

This camera uses the USB Storage Driver as the camera driver.You can use the camera as a USB card reader. After installing the driver and connecting this camera to the PC, you can find [Removable Disk] in [Windows Explorer] or [My computer]. A USB Storage Driver is provided only for Windows. A USB Driver for MAC is not included with the Application CD.You can use the camera with Mac OS 10.0~10.4.

￿XviD codec : This allows movie clips (MPEG-4) recorded with this camera to be played back on a PC.

To play back a movie clip recorded with this camera, you must install the XviD codec. If a movie clip recorded with this camera does not play well, install this codec. This software is only compatible with Windows.

80