Starting PC mode
If you connect the USB cable to a USB port on your PC and then turn on the power, the camera will automatically switch to “computer connection mode”. In this mode, you can download stored images to your PC through the USB cable.
Camera settings for connection1.Turn on the camera2.Connect the camera and computer with the supplied USB cable.3. | Turn on the computer. The camera and |
|
|
| Select USB |
| ||
|
|
| Computer |
|
|
| ||
| computer are connected. |
|
|
|
|
| ||
|
|
|
| Printer |
|
| ||
4. | External device selection menu will be |
|
|
|
|
|
|
|
|
|
| Confirm |
| ||||
| displayed on the LCD monitor. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
5.Select the [Computer] by pressing the Up / Down button and press the OK button.
Connecting the camera to a PC
Charging LED
If you selected [Printer] in Step 5, when you connect the camera to your computer, the [Connecting Printer] message will appear and the connection will not be established.
In this case, disconnect the USB cable, and then follow the procedure from Step 2 onwards.
Disconnecting the camera and PCRefer to page 86 (Removing the removable disk).84