Samsung HT-DL100 Listening to the Radio, Presetting stations, To Listen in Mono/Stereo, Press the MO/ST button. (only FM), To change the Preset StationsTo store other Channels

Listening to the Radio

You can listen to the chosen band (FM or AM broadcast stations) by using either the automatic tuning or manual tuning operation.

Presetting stations

You can store up to:

15	FM stations	FM	Frequency Modulation
8 MW stations		AM(MW)	Medium Wave
7	LW stations	LW	Long Wave

Example: Presetting FM 89.1 in the memory

Remote

Control

Unit

1

Press the Tuner(Band) button.

2

Select a broadcast station.

1	2	3
Press the Tuner(Band) button	Select the MANUAL by	Use the ▲▲ and ▲▲
and select the FM band.	pressing the Stop ( ) button	button to tune into 89.1

¥The selection toggles back and forth between "FM" and "AM" each time the Tuner(Band) button is pressed.

Auto Station 1

Auto Station 2

Manual Station

When the button is pressed, a preset broadcast station is selected.

Hold in the button. Automatic searching begins, and then stops when a station is tuned in.

Press the button to tune to the chosen station. The frequency changes incrementally in either direction each time the corresponding button is pressed.

on the main unit.

¥The selection toggles back and forth between "FM" and "AM" each time the Tuner(Band) button is pressed.

	MHZ				MHZ
L	R	L	R	L	R

Main Unit

1

Press the Function button to select the desired band (AM or FM).

2

Select a broadcast station.

Auto Station 1 Press the	button to select the PRESET mode.
Then press the		button to select a station

stored in the preset

4

Press the Program button.

5

Use the ▲▲ and ▲▲

button to select FM2.

6

Press the Program button.

¥The preset stations operation is completed.

To Listen in Mono/Stereo

Press the MO/ST button. (only FM)

Auto Station 2

Manual Station

Audio

MO/ST

Press the Stop ( ) button to select the MANUAL mode on the front panel. Then hold in the button to make the unit begin automatically searching for broadcast stations.

Press the Stop (	) button to select the MANUAL mode front
panel. Press the		button to tune to the desired

station. The frequency changes incrementally in either direction each time the corresponding button is pressed.

	PROGRAM	MHZ		PROGRAM	MHZ		MHZ
L	R		L	R		L	R

¥When using this feature for the first time, be sure to store the station in the preset memory at FM1 as the unit does not come preprogrammed with default presets.

To change the Preset StationsTo store other Channels

¥	Store the changes while repeating	Repeat steps 3 to 5 above.
	steps 1 to 4 above.

¥The selection toggles back and forth between “STEREO” and “MONO” each time the MO/ST button is pressed.

¥In a poor reception areas, select Mono mode for a clear, interference-free broadcast.

31

32