Samsung HT-DL100 Connections, AUX Connections, TV System Selection, to select the DVD input, Before Using the DVD Player, and TV, button, function, Turn on the power, use, PAL

Connections

AUX Connections Use these connections if necessary.

TV

Picture can be shown only when the TV’s video input connector (VIDEO

VIDEO IN IN) is connected to the VIDEO OUT connector.

Before Using the DVD Player

Your DVD player is capable of playing DVD, VCD, and CD discs.

User instructions may vary depending on the type of disc. Read the instructions carefully before use.

123

	Turn on the power	Select a video mode by	Press the DVD button
Prepe-	to your DVD player	pressing the TV/VIDEO	to select the DVD input
rations	and TV.	button.	function.
before	TV	TV/VIDEO	DVD
use

¥ The word INVALID appears on screen!

	AV OUT	VIDEO S-VIDEO
	Y/C
	COMP.
R-FRONT-L
		VIDEO OUT
	L	CAUTION
		RISK OF ELECTRIC SHOCK
		DO NOT OPEN
	R
6	Audio Cable (Red/White)
SPEAKERS
	If the external analog
	component has only one
	output jack, you may
	connect either L or R.

External Analog

Components

R L ¥

Connect to external equipment with analog output.

Example: Video, TV, LDP, etc.

ANTENNA

AM

FM 75

COAXIAL

Always connect the video and audio connection cables to the equivalent colored jack.

If this message appears on the TV screen while buttons are being operate, the operation is not possible with that particular disc.

¥If your TV model is not SAMSUNG, refer to “Remote Control Unit Setup” on page 26.

	TV System
TV System Selection	Zoom

Press the TV System button while in stop mode.

¥Each time the TV System button is pressed, “NTSC, PAL” are selected in this order.

Different countries use different types of TV broadcast systems, video, audio and channel systems.

Example : The player cannot playback PAL-encoded DVD with NTSC-TV.

CD-R/RW playback compatibility

Making Digital/Analog Input Selection

Remote Control Press the AUX button and select AUX IN.

Main Unit Press the Function button and select AUX IN.

11

¥Your DVD player can also play CD-R and CD-RW discs recorded in digital audio format. When recording your own CD-R or CD-RW discs, make sure that the recording session is properly terminated, or they will not be playable. (Depending on disc properties and recording quality, some CD-R/RW may not be playable.)

¥CD-RW has a lower reflection rate than CD-R media and consequently it will take a longer to read CD-R discs.

¥CD-RW discs recorded at high speed tend to be difficult for the DVD player to read. If the recording speed for the CD-RW disc is not predetermined, write it at low speed.

12