Samsung HT-DL100 Troubleshooting, To Select a DSP, To set up Sleep, Press the DSP Mode button, Check

DSP/Sleep Function

DSP Mode

Troubleshooting

To Select a DSP

Press the DSP Mode button.

¥ The DSP mode toggles in the following

What is a DSP?

Problem Check

¥Is the disc installed with the label side facing up?

The disc tray does not	¥ Is the power cord plugged securely into the power outlet?
open.
	¥

order each time the DSP button is pressed:	DSP synthetically recreates the sound
HALL ➔ THEATER ➔ PAVILION ➔
	field to achieve a more realistic,
DANCE CLUB ➔ LIVE CLUB.

powerful sound.

¥ DSP mode cannot be selected when a microphone is connected.

¥When playing a DVD containing MPEG format, video may not be reproduced correctly and you may get picture distortion.

Effect

To increase Effect levelPress the Effect button.

Turn off the power to the unit by pressing the Power (	) button
and turn it back on.

	¥ Check the region number of the DVD.
Disc does not play.	¥ DVD discs purchased abroad may not be playable.
	¥ This player cannot play CD-ROMs, DVD-ROMs, etc.
	¥ Check the rating level of the DVD.
Playback does not start	¥ Check whether the disc has any scratch marks or is deformed?
immediately when the
Play/Pause button is pressed.
	¥ Is the power cord plugged securely into the power outlet?
	¥ No sound is heard during high-speed playback, slow playback,

¥The effect level can be set in steps from 1 to 4 EFFECT1 ➔ EFFECT2 ➔ EFFECT3 ➔ OFF(DEFAULT).

Each time the button is pressed the selection moves to the next effect.

¥The higher the number, the stronger the DSP surround effect will be.

Sleep

To set up Sleep

Press the Sleep button.

¥Each time the button is pressed the selection toggles as follows: SLEEP 10 ➔ SLEEP 20

➔SLEEP 30 ➔ SLEEP 60 ➔ SLEEP 90

➔SLEEP 120 ➔ SLEEP 150 ➔ OFF.

To Review Sleep Setting

What is a Effect?

This sets the strength of the DSP mode.

What is the

Sleep function?

You can set the delay time so that the unit powers off automatically after a preset period of time.

No sound is produced.	and step motion playback modes.
	¥ Are the speakers properly connected? Is the speaker Setup
	correctly customized?
	¥ Is the disc installed with the label side facing up?
	¥ Is the disc severely damaged?
	The disc may be dirty. Wipe off fingerprints or dirt.
Picture does not appear; sound	¥ Was the player moved suddenly from a cold pace to a warm one?
is not produced; the disc tray	When condensation forms inside the player, remove the disc
	and let the player stand for 1 or 2 hours with the power on. (You
opens 2-5 seconds later.
	can use the player after the condensation disappears.)
Sound quality is	¥ Are the speaker cables loose?
irregular.	¥ Is there any dirt or debris at the end of the speaker connector?
Dolby Digital 5.1 Channel	¥ Does the disc being played show the “Dolby Digital 5.1CH” mark ?
Surround Sound is not	5.1-channel sound is reproduced only if the disc is recorded with
being reproduced.	5.1 channel sound.

¥The remaining time for the selected Sleep time is displayed.

¥Pressing the button once again changes the Sleep time from the last setting.

35

¥ Is the DVD player connected to the proper speakers?

36