Samsung SMART Signage TV RH48E LED LH48RHEELGW/EN, LH55RHEELGW/EN, LH55RHEELGW/XE Setup, Initial settings (Setup), Accessibility, Setup, Time, Auto Source Switching, Power Control, Eco Solution, Temperature Control

Setup

MENU m →System →Setup →ENTER E

System

Accessibility

Setup

Time

Auto Source Switching

Power Control

Eco Solution

Temperature Control 77

-- The displayed image may differ depending on the model.

Initial settings (Setup)

After powering on the product for the first time, configure basic settings such as the language, channel and time.

Press the button.――Initial Setup automatically changes Source to TV.――The default PIN number for a new product set is “0-0-0-0”.1 Menu LanguageSelecting a language.

Press the u or d button, and then press the E button. Specify the OSD menu language.

2 Display Orientation--Landscape / PortraitConfigure the menu page orientation.3 Auto Power Off

The product will automatically turn off if you don’t press a button on the remote or touch a button on product front panel within select hours to prevent overheating.

--Off (Recommended) / 4 hours / 6 hours / 8 hours ――Availability depends on the specific model and area.

4 Network Settings

Set up your network connection. Press the E button to start. If you do not know your network set up information or want to set to it later, select Skip. You can set up the network connection later using the Network menu.

5 Configure your TVChoose where you are watching your TV.Select the broadcast signal connected to the product.--Aerial (Direct to TV) / No channels (display only)

113