Samsung SMART Signage TV RH48E LED LH48RHEELGW/EN, LH55RHEELGW/EN, LH55RHEELGW/XE Possible Solution, Problem

Problem Possible Solution

The connected device is not displayed.

•• Check whether or not the device supports Anynet+ functions.

•• Check whether or not the HDMI cable is properly connected.

•• Check whether Anynet+ (HDMI-CEC)is set to On in the System menu.

•• Search Anynet+ devices again.

•• Anynet+ requires an HDMI connection. Make sure the device is connected to your product with an HDMI cable.

•• Some HDMI cables may not support Anynet+ functions.

•• If the connection is terminated because there has been a power failure or the HDMI cable has been disconnected, please repeat the device scan.

133