Samsung LH43PMFPBGC/EN manual Auto adjustment control PC and BNC only, Video Wall Mode Control

Chapter 2. Device setup

Setting PIP on/off (Set the PIP ON/OFF)

Header	Command	ID	Data	Data	Checksum
			length
0xAA	0x3C		1	“PIP”

“PIP”: A code used to turn the PIP mode of a product on or off

•1: PIP ON

•0: PIP OFF

Ack

Header	Command ID	Data	Ack /	r-CMD	Val1	Checksum
		length	Nak
0xAA	0xFF	3	‘A’	0x3C	“PIP”

“PIP”: A code used to turn the PIP mode of a product on or off

Nak

Header	Command ID	Data	Ack /	r-CMD	Val1	Checksum
		length	Nak
0xAA	0xFF	3	‘N’	0x3C	“ERR”

“ERR” : A code showing what error has occurred.

Auto adjustment control (PC and BNC only)

Function

• Automatically adjust the PC system screen using a PC.

Viewing auto adjustment state (Get Auto Adjustment Status)

• None

27

Setting auto adjustment (Set Auto Adjustment)

Header	Command			ID	Data	Data		Checksum
					length
0xAA	0x3D				1	“Auto
						Adjustment”
“Auto Adjustment”: 0x00 (at all times)
Ack
Header	Command	ID	Data		Ack /	r-CMD	Val1	Checksum
			length		Nak
0xAA	0xFF		3		‘A’	0x3D	“Auto
							Adjustment”
Nak
Header	Command	ID	Data		Ack /	r-CMD Val1		Checksum
			length		Nak
0xAA	0xFF		3		‘N’	0x3D	“ERR”

“ERR” : A code showing what error has occurred.

Video Wall Mode Control

Function

• Video Wall mode can be activated on a product using a PC.

•This control is only available on a product whose Video Wall is enabled.

Viewing video wall mode (Get Video Wall Mode)

Header	Command	ID	Data length	Checksum
0xAA	0x5C		0