Samsung NP10 Turning On the Computer, Adjusting the LCD Display, To adjust the LCD:, 2.Lift up the cover, 3.Press and then release the power button

Turning On the Computer

To turn on the computer’s power for the first time:

1.Push the LCD cover button, located on the front of the computer below the MP3/ CD Player.

2.Lift up the cover.3.Press and then release the power button.The power light is on when the computer’s power is on.

Power Button

Cover Latch Button Power Light

Initial Computer Startup:

The first time you start your computer you will see the operating system registration screens. Simply read each screen and follow the simple directions. You must complete this process in order to use your computer. A tutorial is provided if you require it.

Adjusting the LCD Display

You may wish to adjust the LCD (Liquid-Crystal Display) when you begin using your computer. A TFT (Thin-Film Transistor) LCD does not require adjustment for contrast because the contrast is set to remain at maximum.

To adjust the LCD:•Press <Fn+Up Arrow> to increase the display brightness.•Press <Fn+Down Arrow> to decrease the display brightness.

Using Your Computer for the First Time 9