Samsung SCC-641N, SCC-641P SCC-641(P)Installation

SCC-641(P) Installation

1. [Figure 1] Install the structure on the ceiling.

(Refer to Installation reference for the Length of the structure) * Built in by the builder of the structure

[Figure 1]

Lenght of ceiling Hole

2. Make a hole in the ceiling where the camera will be installed. (The hole should be about 180)

3. [Figure 2] Assemble the BRKT-ANCHOR on the ceiling and screw the 4 bolts in.

[Figure 2]

4. [Figure 3,4] Connect the various cables to the CAMERA ADAPTER. (See page 2-6)

[Figure 3]

[Figure 4]

5.[Figure 5] Match the BRKT-ANCHOR and CAMERA ADAPTER and use 4screws (PH M4x8) to assemble them.

[Figure 5]

￿￿￿ ￿￿￿