Samsung SCC-C6405P 1. CAMERA SET MENU, CAMERA ID

ALARM SET	ALARM PRIORITY SET			ALARM1 1~4
				ALARM2 1~4
				ALARM3 1~4
				ALARM4 1~4
				EXIT	QUIT/SAVE
	ALARM IN SET			ALARM1 NO/NC/OFF
				ALARM2 NO/NC/OFF
				ALARM3 NO/NC/OFF
				ALARM4 NO/NC/OFF
				EXIT	QUIT/SAVE
	ALARM OUT SET			ALARM1 1~3
				ALARM2 1~3
				ALARM3 1~3
				ALARM4 1~3
				MOTION 1~3
				EXIT	QUIT/SAVE
	AUTO SET	ALARM1 OFF/1~3/HALF1/HALF2/FULL/SCAN1~4
		ALARM2 OFF/1~3/HALF1/HALF2/FULL/SCAN1~4
		ALARM3 OFF/1~3/HALF1/HALF2/FULL/SCAN1~4
		ALARM4 OFF/1~3/HALF1/HALF2/FULL/SCAN1~4
		MOTION OFF/1~3/HALF1/HALF2/FULL/SCAN1~4
		EXIT		QUIT/SAVE
	AUX OUT CONTROL			OUT1	ON/OFF
				OUT2	ON/OFF
				OUT3	ON/OFF
	RET			EXIT	QUIT/SAVE
OTHER SET	PROPOTIONAL P/T		ON/OFF
	TURBO P/T		ON/OFF
	AUTO CAL		OFF/6H/12H/18H/24H
	D-FLIP		ON/OFF
	CAM RESET		...
	LANGUAGE		ENGLISH/FRANÇAIS/DEUTSCH/ESPAÑOL
	PASSWORD		ON.../OFF
SYSTEM INFO	EXIT		QUIT/SAVE

The diagram shown above illustrates the overall structure of the Setup Menu. In this section, a description of the Setup menu features will enable users of the SCC-C6405(P) to tailor it to their personal needs.

❈If the power is turned off after PRESET, AUTO PAN, SCAN, PATTERN function is activated and no other control is made, camera will do the same function after the power is turned on.

❈Menu setting is available only when tilt position is under 90°. When tilt position is over 90° and menu-on command is received, pan will automatically rotate 180° and tilt will be move to the corresponding position.

Use the controller to press the MENU selection key and the following
										E
screen will be displayed.
	* * MAIN MENU * *
		CAMERA SET	...		0	1	2	3	4
		VIDEO SET...		5		6	7	8	9
		PRESET ...
		ZONE SET...					✽ ✽ ✽ ✽
		AUTO SET...
		ALARM SET...
		OTHER SET...
		SYSTEM INFO...
				➁ PASSWORD
	➀ PASSWORD
					DEFINED
	UNDEFINED

In case of ➀, use UP/DOWN/LEFT/RIGHT/[ENTER] key for MENU setup. In case of ➁, type in the 4 digit password first. If correct, the MENU selection screen like ➀ will be displayed and you will be able to set up MENU by pressing UP/DOWN/LEFT/RIGHT/[ENTER] key.

1. CAMERA SET MENU

CAMERA ID

The CAMERA ID menu assigns an ID to the SCC-C6405(P) to be displayed on the connected monitor.On the CAMERA SET menu screen, select CAMERA ID to ON and press [Enter]. You will see the sub screen for deciding on the ID of the SCC-C6405(P). The Camera ID can have up to 20 alphanumeric characters, along with several special characters.

The assigned camera ID may be positioned to any desired location on the screen by using the LOCATION submenu.

3-3 3-4