Samsung SCC-C6405P SET ZONE AREA, SET ZOOM, ZONE DIR SET/ZONE AREA SET, EXIT, REVERSE

N(NORTH), NE(NORTH-

SET ZONE AREA

Press [ENTER] at the “SET ZONE AREA...” position to enter the PRIVACY ZONE setup screen. Control PAN/TILT/ZOOM to select 4 apexes of the PRIVACY ZONE area and the rectangular PRIVACY ZONE area will be completed.

PRIVACY ZONE SET	0		PRIVACY ZONE P/T 1
	ON...
SET ZONE AREA						➜
SET ZOOM	OFF	➜
REVERSE	OFF					After P/T/Z
		Press		●
						control, press
		[Enter]
						[ENTER]
EXIT	QUIT
PRIVACY ZONE P/T 2				PRIVACY ZONE P/T 3
		➜
●		After P/T/Z			●
		control, press
		[ENTER]

	PRIVACY ZONE P/T 4
➜
After P/T/Z	●
control, press
[ENTER]

❈For the safer privacy protection, select about 10 % more than the actual size to hide when you set up the PRIVACY ZONE area.

❈4 points of PRIVACY ZONE area are in the middle of the screen. Therefore, when the tilt is positioned at upside limit(0° or 180°), PRIVACY ZONE cannot be set in the area which is displayed above center.

❈If the points becomes X shape, it means PRIVACY ZONE cannot be set due to the size limitation.

SET ZOOM

Press [ENTER] at the “SET ZOOM...” position to enter the ZOOM setup screen. After ZOOM setup, the PRIVACY ZONE function will be in action only at the higher magnification than the Zoom magnification

as set.

PRIVACY ZONE SET	0
			SET ZOOM
SET ZONE AREA	ON...
SET ZOOM	...	➜
REVERSE	OFF
		Press
				E
		[Enter]
EXIT	QUIT

REVERSE

The REVERSE function applies PRIVACY MASK to the other area than set as a privacy zone. ON/OFF is available.

PRIVACY ZONE SET 0

SET ZONE AREA	ON...
SET ZOOM	...
REVERSE	ON

EXITQUIT

EXIT

"QUIT" : Does not save the selected information and returns to a higher menu.

"SAVE" : Do saves the selected information and returns to a higher menu.

"DEL" : Deletes the selected information and restores the DEFAULT. Then returns to a higher menu.

ZONE DIR SET/ZONE AREA SET

This function indicates the ID or direction depending on the set value when PAN of SCC-C6405(P) is located in a specific area. If set to AREA, it indicates the ID of the selected area and if set to

EAST), E(EAST), SE(SOUTH-EAST), S(SOUTH), SW(SOUTH-WEST), W(WEST),

NW(NORTH-WEST.

3-19 3-20