installation & connection
PREPARING INSTALLATION
Use the ceiling installation template when you install the camera on the ceiling on your own.
Run the cables through the “” shaped hole on the center of the template, and remove fi lms on the adhesives, and then attach the template on the desired location on the ceiling.
When installing the frames set, align all template’s screw holes and those of the frames set.
This template prevents dust entering from the ceiling into the camera assembly.
<TEMPLATE>
CEILING | CABLES | CEILING TEMPLATE CABLES |
INSTALLATION
1.Press the “SNAP FIT” on the “ADAPTOR” to open the “ADAPTOR”, and arrange cables so they pass out of the “FRAME SET”.
FRAME SET
|
| FRAME SET | |
|
| ADAPTOR | |
| SNAP FIT | EXTERNAL | |
ADAPTOR | CABLES | ||
| |||
|
| ||
|
| SNAP FIT |
10_ installation & connection