2.Use the three “SCREWS” to fi x the “FRAME SET” on a “CAMERA” installation position.
FRAME SET
EnglishSCREW
ADAPTOR
SCREW
<Fixing Hole Diagram>3.Connect external cables to the “CONNECTORS(ALARM IN, POWER,
|
| FRAME SET |
POWER INPUT ALARM OUT | ADAPTOR | |
ALARM IN |
|
SNAP FIT
BNC JACKINSULATION TUBEM Then, wrap the “BNC JACK” with the “INSULATION TUBE”, and use an insulation tape to seal up the end of the “INSULATION TUBE” so that the “BNC JACK” does not protrude outside of the “INSULATION TUBE” coating.
For more information about cable connection, refer to “Connecting the adaptor cable”. (page 19)
English _11