Samsung SCC-C6453P English _15, Baud Rate Setup, The factory default is 9600 BPS, <RS-485Half Duplex Organization, Setting RS-422A/RS-485Termination

Baud Rate SetupUse pins #5, #6 of SW603 to set the baud rate.

English

BAUD RATE	PIN 5	PIN 6
4800 BPS	ON	ON
9600 BPS	OFF	ON
19200 BPS	ON	OFF
38400 BPS	OFF	OFF

The factory default is 9600 BPS.Setting RS-422A/RS-485 Termination

As it is shown in the structure map, when Controller and RS-422A/RS-485 is connected, it should be terminated according to the Cable feature of impedance on the each end of the transmitting line to transfer the signals in long distance by controlling the reflection of the signals to the lowest.

	Termination			n < 32	Termination
Controller	TX+(DATA+)
					SW1-ON
	TX-(DATA-)
					RX+
	RX+ RX-	RX+ RX-	RX+ RX-	RX-
	CAM 1	CAM 2	CAM n-1	CAM n

<RS-485 Half Duplex Organization>

Termination : Using numbers 1 and 2 PIN, turn to <ON> and it will be terminated.

English _15