CAMERA MENU Organization
(MANU)
E
PRESET3200K
RET
FOCUS MODE
The FOCUS MODE menu performs MF(Manual Focus), and ONEAF(One Auto Focus).
-MF :You can manually adjust the focus.
-ONEAF : Focusing will take about 5 seconds in ONEAF mode. When turned off, it is same to the MF mode.
| CAMERA ID | ON... |
| IRIS | ALC... |
| SHUTTER | OFF |
| AGC | LOW |
| WHITE BAL | ATW1 |
| FOCUS MODE | ONEAF |
| ALARM SET | ... |
| COLOR/BW | COLOR... |
| PRIVACY | ON... |
| SPECIAL | ... |
| PRESET | ... |
| EXIT | QUIT |
|
|
|
ALARM SET
The Alarm Set feature consists of one Alarm In and one Alarm Out, which detects an |
| ||||||||||||
Alarm In signal from an external sensor and moves to the position |
| ||||||||||||
Position Set for the alarming process. Then, it returns to the original position. And it also |
| ||||||||||||
transfers the Alarm Out signal to external devices. When as much time as the Dwell Time | E | ||||||||||||
in that position has passed, it will go back to the original position. If no particular position | |||||||||||||
| |||||||||||||
is defined by the Position Set, it will move to the maximum TELE. |
|
|
| ||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
| CAMERA ID | ON... |
|
|
| (ALARM SET) |
|
|
| |||
|
| IRIS | ALC... |
|
|
|
|
|
|
|
| ||
|
| SHUTTER | OFF |
|
|
|
|
|
|
|
| ||
|
| AGC | LOW |
|
|
| ALARM IN |
| OFF |
|
| ||
|
| WHITE BAL | ATW1 |
|
|
|
|
|
| ||||
|
| FOCUS MODE | ONEAF |
|
|
| MOTION DET | OFF |
|
| |||
|
| ALARM SET |
| ... | PRESS THE |
| POSITION SET | ... |
|
| |||
|
| COLOR/BW |
| COLOR... | ENTER |
| ZOOM DWELL TIME | 5S |
|
| |||
|
| PRIVACY | ON... | BUTTON. |
| ALARM OUT | ALL |
|
| ||||
|
| SPECIAL | ... |
|
|
| |||||||
|
|
|
|
|
|
|
| ||||||
|
| PRESET | ... |
|
|
| RET |
|
|
| |||
|
| EXIT | QUIT |
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
MOTION DET detects any motion. Set up this function during no human movement to detect
If you select ON and press the ENTER button, the MOTION DET screen will come up.You can set the AREA to which the Motion Detection function will be applied to either PRESET or USER. If you set the AREA option to PRESET, the Motion Detection function will be applied to the areas preset as factory defaults. If you set the AREA option to USER and press the ENTER button, you can change the area size and position and select the area where you want to apply the Motion Detection function.You can specify the size of the area by using the UP, DOWN, LEFT, and RIGHT buttons. If the area is not flashing, press the ENTER button. When the area starts flashing, use the UP, DOWN, LEFT and RIGHT buttons to specify the location of the area. Use the ENTER button and the UP, DOWN, LEFT, and RIGHT buttons to specify the size of the area and to position the area. Press the ENTER button again to exit the AREA setting menu. You can use the SENSITIVITY option to set the motion detection sensitivity.The higher the setting, the more sensitive the motion detection.
36 | 37 |