Samsung SCC-C9302FP SCC-C9302FP, SCC-C9302P, SCC-C9302P/SAU, SCCC9302FP/SAU CAMERA MENU Organization, AUTO

CAMERA MENU Organization

BW

This is the IR Filter OFF mode, black-and-white

(with the same sensitivity as a black-and-white camera). Select BW... and press [Enter] and the BW submenu will appear.You may determine to sent out BURST signals by ON or OFF setting in this submenu.

E

❖WHITE BAL will be marked --- so that setup is unavailable.

❖In AUTO mode, AGC menu will be displayed as "---" and you cannot change it manually,

CAMERA ID	ON...		(BW)
IRIS	ALC...
SHUTTER	OFF
AGC	LOW
WHITE BAL	---
FOCUS MODE	ONEAF
ALARM SET	...	PRESS THE
COLOR/BW	BW...	ENTER
PRIVACY	ON...	BUTTON.	BURST	ON
SPECIAL	...
PRESET	...		RET
EXIT	QUIT

AUTO

Depending on illumination, it is automatically switched to the COLOR or BW mode. In the poor illumination environment, turns IR Filter off to convert to the Black-and- White mode for better sensitivity and in the good illumination environment, turns it on to convert to the COLOR mode for worse sensitivity. Select AUTO and press [Enter]

and the AUTO BW submenu will appear to control the BW level. Depending on ON						E
or OFF, the BURST signal may output or no.
	CAMERA ID	OFF		(AUTO)
	IRIS	ALC...
	SHUTTER	OFF
	AGC	---
	WHITE BAL	ATW1
	FOCUS MODE	ONEAF			ON
	ALARM SET	...	PRESS THE	BURST
	COLOR/BW	AUTO...	ENTER	LEVEL	LOW
	PRIVACY
		ON...	BUTTON.	DURATION	S ---I--- L
	SPECIAL	...
	PRESET	...		RET
	EXIT	QUIT

-BURST ON :The color burst signal is output together with black and white composite video signal.

-BURST OFF : The color burst signal is not output.

-LEVEL :You can set the brightness level that changes from COLOR mode to BW mode in 3 steps : LOW, MEDIUM, and HIGH.

-DWELL TIME : Set the HOLDING time for switching between COLOR and BW mode depending the changes in the amount of light.You can set the HOLDING time to 10sec (S), 30sec, 60sec, or 300sec( L).

In AUTO mode, AGC will operates in high speed mode, and you cannot change it manually, as it is indicated by "---".

40 41