setting static ip
mANUAl NETWORk SETTING
Run the <IP Installer.exe> program and display the camera list found on the screen. For the initial run, the [Auto Set] and [Manual Set] button are all disabled.
1 | Select a camera you want from the | 1 |
|
|
|
|
|
|
|
| camera list. |
|
|
|
|
|
|
|
|
| Confirm the MAC Address of the camera |
|
|
|
|
|
|
|
|
| on its rear panel. |
|
|
|
|
|
|
|
|
| The [Auto Set] and [Manual Set] button |
|
|
|
|
|
|
|
|
2 | are activated. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
Click the [Manual Set] button. |
|
|
|
| |||||
2 |
|
|
The Manual Set window appears.
The <IP Address>, <Subnet Mask>, <Gateway> and <HTTP Port> values of the camera are displayed in their default values.
The password is set to “4321” by factory default.
3 Set up the IP related settings in the <ADDRESS>field.
<MAC Address>: The MAC Address
printed on the camera rear penal is 3 automatically displayed. No additional
setting is required.
<If using an IP router>
<IP Address>: Set it according to the private IP address range provided by the IP Router.
ex) 192.168.1.2~254, 192.168.0.2~254, or 192.168.XXX.2~254
<Subnet Mask>: The IP Router’s <Subnet Mask> becomes camera’s <Subnet Mask>value.
<Gateway>: The IP Router’s <LAN IP Address> becomes camera’s <Gateway>value.
<If not using an IP router>
For the <IP Address>, <Gateway> and <Subnet Mask> settings, contact your network administrator.
3
22_ Setting Static IP