Samsung SP-H710AE Viewing the picture, Setup Source and Connections, CONNECTING TO VIDEO EQUIPMENT, Equipment Video to Connecting Setup Source and Connections, COMPOSITE

CONNECTING TO VIDEO EQUIPMENT

Connecting to VCR/Camcorder/Cable BoxRear side of Projector

S-Video Cable Video (Composite) Cable

or

VCR

Rear Connection Camcorder

Cable Box

Connect COMPOSITE (yellow) input port of the projector to the VIDEO OUT (yellow) port of video equipment using the video cable.

■If the video equipment has S-VIDEO OUT port, connect it to S-VIDEOinput port of the projector.

Viewing the picture

COMPOSITE	1 Turn on the projector and press the		Composite
1	COMPOSITE button to select Composite.
S-VIDEO	2 Connect the projector and the video
2
	equipment via S-Video cable and press the
	S-VIDEObutton to select S-Video.
	■ When Composite Mode is not available, check the
	video cables are in place.
		■ Check that the projector and the video
	NOTE	equipment are turned off before connecting
		cables.

■This projector does not support sound. (Separate audio system is needed for sound.)

Equipment Video to Connecting Setup Source and Connections

23