CONNECTING TO VIDEO EQUIPMENT
Connecting to the Digital TV Receiver
Rear side of Projector
PC Video Cable
| DVI Video Cable | Component Cable |
| or |
| Digital TV Receiver |
|
| |
| Rear Connection |
Setup Source and Connections
1signal input terminal of the receiver.Connect antenna cable to antenna
| Connect COMPONENT1 or |
| COMPONENT2 (Y/Pb/Pr) port of the |
2 | projector to Component port of the |
| receiver using Component Cable. |
■ If the receiver has DVI or PC OUT port, you can connect it to DVI or PC input port of the projector.
Equipment Video to Connecting
Viewing the picture
COMP.1 | 1 Turn on the projector and press the COMP.1 | Component1 |
1 | button to select Component1. |
|
COMP.2 |
|
|
2 | 2 Press the COMP.2 button to select |
|
PC |
| |
Component2 if COMPONENT2 is connected. |
| |
DVI | If the receiver is connected to DVI or PC port, |
|
|
| |
| press the DVI or PC button to select DVI or PC | DVI |
| respectively. |
|
■ When Component Mode is not available, check that the component cables are in place.
25