Samsung SSA-M1000 SSA-M1000/EXP DOOR SETTING, logging in & initial setup, 54_ logging in & initial setup

logging in & initial setup

8.Enter the [Device].

9.Check [Whether to use].

10.Click Save <> in the tool bar.

11.When “Restart the Communication Server?” message appears, click [Yes(Y)].

J If SAMS Communication Server Basic is running and site configuration is properly done, communication server will restart normally. If SAMS Communication Server Basic is not running or the site information is improperly configured, communication server may fail to restart.

DOOR SETTING

Select the site and loop from registered list and apply to a door.

1.From the upper menu, select [System Management] > [Door Setting].

2.Select a [Site].

3.Select a [Loop].

4.Select a [Device]. According to the selected device’s type, number of door tabs may vary. When selected a 4- Door device, there will be 4 door setting tabs appeared.

5.Enter the [Door].

54_ logging in & initial setup