system management
4.This is a step to configure the device settings. Scan for controllers to communicate with via the previously specified loop and select one to register. Specify the address range for the controllers to scan for. By default, the automatic scan will check the address range of between 0 and 1. Click [Auto Search Controller] to scan for controllers within the specified range. The controllers found will be displayed in the [Searched Controller List]. Select a controller to use in the controller list and drag and drop it to the [Registered Controller List] on the bottom. Or use the triangle or the inverted triangle shaped button to register or delete it. Select the name column of each controller in the [Registered Controller List] and rename it as necessary. Click [Next] to move to the next step.
5.Confirm the registered information. Check whether the controller setting is properly done, and click [Save] to finish the setting.