SITE SETTING [ADD]
1.From the upper menu, select [System Management] > [Site Setting].
MANAGEMENT SYSTEM
2.Click Add <
J If a site has been newly added, Site Setting of SAMS Communication Server Basic should be done again.
3.Enter the [Site].
4.Enter the IP address of the computer that is installed with SAMS Communication Server Basic.
5.Check the port. It is recommended to use the default 51008.
J If this port is changed, communication to the SAMS Communication Server Basic may not establish. If changed this port, make the same change to the SAMS Communication Server Basic too.
6.Check whether the [Use] is checked.
J If [Use] is not checked, communication to the corresponding communication server will not establish. This can be used when intended not to connect temporarily to a specific server.