192
User Level settings
LS9-16/32 Owner’s Manual
3Enter the current password, move the cur-
sor to the OK button, and press the
[ENTER] key.
For details on entering a password, refer to “Assigning
a name” (→ p. 34).
When you enter the correct password, a keyboard win-
dow will appear, allowing you to enter the new pass-
word.
4Enter the password in the NEW PASSWORD
field; then move the cursor to the OK button
and press the [ENTER] key.
If you are logged-in as a user, you can edit your custom
fader layer, user-defined keys, and preference settings, and
overwrite (save) them onto your user authentication key. If
you are logged-in as a Power User, you can also change
the user level.
1Log-in as a user, and edit the custom fader
layer (→ p. 91), user-defined keys (→ p. 196)
and preference settings (→ p. 194).
If you are logged-in as a Power User, you can also
change the user level.
2In the DISPLAY ACCESS section, press the
[SETUP] key repeatedly to access the USER
SETUP screen.
3Move the cursor to the SAVE KEY popup
button, and press the [ENTER] key.
A dialog box will ask whether you really want to over-
write (save) the user authentication key.
4To overwrite (save), move the cursor to the
OK button and press the [ENTER] key.
Here’s how to view/change the user level of the logged-in
user.
• For the Administrator
...............There is no such setting for the
Administrator himself, but the set-
ting for the Guest account can be
changed.
• For the Guest ..........The setting of the Guest account
can be viewed. It cannot be
changed.
• For a normal User... The setting of that User account
can be viewed. It cannot be
changed.
• For a Power User.... The setting of that User account
can be changed.
1In the DISPLAY ACCESS section, press the
[SETUP] key repeatedly to access the USER
SETUP screen.
2Move the cursor to the USER LEVEL popup
button and press the [ENTER] key to
access the USER LEVEL popup window.
Editing a user authentication key
SAVE KEY popup button
Changing the user level
• If you attempt to log-in as a different user after changing the
settings but not saving them, a message will ask you whether
you want to save the user authentication key. In this case, you
can also save the user authentication key by moving the cur-
sor to the OK button and pressing the [ENTER] key.
HINT
USER LEVEL popup button
•If you are logged in as Administrator, you can move the cursor
to the “for Guest” USER LEVEL popup button and press the
[ENTER] key to access the USER LEVEL popup window,
where you can view or change the guest’s user level.
NOTE