194
Preferences
LS9-16/32 Owner’s Manual
Settings related to the operating environment (such as whether or not certain messages are dis-
played, or whether key operations are linked) can be made according to the preferences of each
user. These settings are changed for the user who is logged-in, but if you are logged-in as the
Administrator, you will also be able to change the Guest settings.
1In the DISPLAY ACCESS section, press the
[SETUP] key repeatedly to access the USER
SETUP screen.
2Move the cursor to the PREFERENCE
popup button, and press the [ENTER] key
to access the PREFERENCE popup win-
dow.
This page includes the following items.
1CONFIRMATION field
Here you can select whether confirmation messages
will appear when you perform scene or patch opera-
tions.
●STORE
●RECALL
If these buttons are on, a confirmation message
will appear when you perform a scene Store or
Recall operation respectively.
●PATCH
If this button is on, a confirmation message will
appear when you edit an input patch or output
patch.
●STEAL PATCH
If this button is on, a confirmation message will
appear when you edit an input patch or output
patch item that is already patched.
BERROR MESSAGE field
Here you can select whether an error message will be
displayed when the following problems occur.
●DIGITAL I/O
When an error is detected in the digital input/out-
put.
●MIDI I/O
When an error is detected in MIDI transmission/
reception.
CPANEL OPERATION field
Here you can make settings for options related to
panel operation.
●AUTO CHANNEL SELECT—INPUT
●AUTO CHANNEL SELECT—OUTPUT
These specify whether the corresponding channel
will be selected when you operate a channel’s
[ON] key or fader. This can be turned on/off sep-
arately for INPUT (input channels) and OUT-
PUT (output channels).
●[CUE] → [SEL] LINK
Specifies whether channel selection will be linked
with cue operations. If this button is on, pressing
the [CUE] key of a channel will simultaneously
select that channel and light its [SEL] key.
●[LAYER] → [SEL] LINK
Specifies whether channel selection will be linked
with fader layer selection. If this button is on, and
you press a panel LAYER key to switch the fader
layer, the last-selected channel of that fader layer
will be selected, and its [SEL] key will light.
Preferences
PREFERENCE popup button
•If you are logged in as Administrator, you can move the cursor
to the “for Guest” PREFERENCE popup button and press the
[ENTER] key to access the PREFERENCE popup window,
where you can view or change the guest’s preference set-
tings.
NOTE
1 32