198
Console lock
LS9-16/32 Owner’s Manual
1When the CONSOLE LOCK screen is dis-
played, press the [ENTER] key.
If you are logged-in as a user for whom no password is
set, the console will be unlocked. If you are logged-in
as a user for whom a password is set, a keyboard win-
dow will appear, allowing you to enter the password.
2Enter the password of the logged-in user,
move the cursor to the OK button, and
press the [ENTER] key.
The console will be unlocked, you will return to the
MISC SETUP screen, and the controls will be opera-
ble once again.
If an image file is saved in USB memory, the CONSOLE
LOCK screen can display that image.
In the SAVE/LOAD popup window, specify the image file
that you want to display and load it from USB memory.
For the procedure of loading from USB memory, refer to
“Loading a file from USB memory” (→ p. 200).
Unlocking the console
•You may disconnect the USB memory device while the con-
sole is locked. Insert the USB memory device before you
defeat Console Lock.
HINT
Specifying the CONSOLE LOCK
screen image
•The image file is not backed-up in internal memory. Each time you
turn on the power, you will need to reload it from USB memory.
• The image file will be converted into 320 x 240 pixels, 216 colors
for display.
• The image file is limited to 8/16/24/32-bit color, un-compressed,
and a maximum of 307,256 bytes.
NOTE