JVC GR-DVL915 manuals

Photography > Digital Camera

When we buy new device such as JVC GR-DVL915 we often through away most of the documentation but the warranty. Very often issues with JVC GR-DVL915 begin only after the warranty period ends and you may want to find how to repair it or just do some service work. Even oftener it is hard to remember what does each function in Digital Camera JVC GR-DVL915 is responsible for and what options to choose for expected result. Fortunately you can find all manuals for Digital Camera on our side using links below.

JVC GR-DVL915 Specifications

92 pages2.67 Mb

EN
- INSTRUCTIONS
GR-DVL915 GR-DVL715 GR-DVL515 GR-DVL510 GR-DVL410 GR-DVL310
- DIGITAL VIDEO CAMERA
  - CONTENTS
- 2SAFETY PRECAUTIONS
  - The rating information and safety caution of the AC Adapter are on its upper and lower sides.
  - Dear Customer,
  - WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
    - CAUTIONS:
      - Caution on Replaceable lithium battery
      - 3CAUTION:
      - CAUTION!
      - 4Before recording an important scene . . .
  - 5PROVIDED ACCESSORIES
  - 6AUTOMATIC DEMONSTRATION
    - Automatic Demonstration takes place when DEMO MODE is set to ON (factory-preset).
    - How To Attach The Core Filter
    - 12 3
      - 7GETTING STARTED
        8 (cont.)
        For other notes, pg. 71
        Power
        CHARGING THE BATTERY PACK
        9USING AC POWER
        Use the AC Adapter (connect as shown in the illustration).
        pg. 71.
        For other notes,
        The provided AC Adapter features automatic voltage selection in the AC range from 110 V to 240 V.
        ATTENTION:
        ( ) : when the video light is on
        Recording time is reduced significantly under the following conditions:
        Zoom or Record-Standby mode is engaged repeatedly.
        The LCD monitor is used repeatedly.
        The playback mode is engaged repeatedly.
        USING THE BATTERY PACK
        Perform step 1 of CHARGING THE BATTERY PACK ( pg. 8). Approximate recording time
        About Batteries
        INFORMATION:
        10Grip Adjustment
        Viewfinder Adjustment
        Tripod Mounting
        (cont.)
        Shoulder Strap Attachment
        11Date/Time Settings
        12Loading/Unloading A Cassette
        (cont.)
        *
        It takes a few seconds for the cassette holder to open. Do not apply force.
        To Protect Valuable Recordings . . .
        13Recording Mode Setting
        14 (cont.)
        Picture Quality Mode Setting
        pg. 36.
        ATTENTION:
        Loading A Memory Card
        To Unload A Memory Card . . .
        Be sure to use only SD Memory Cards marked or MultiMediaCards marked .
        Before using a new memory card, it is necessary to FORMAT the card.
    - 15VIDEO RECORDING & PLAYBACK
      - VIDEO RECORDING & PLAYBACK
        VIDEO RECORDING ....................... 16 20
        VIDEO PLAYBACK .........................21 24
        16Basic Recording
        For other notes, pg. 71
        JOURNALISTIC SHOOTING
        SELF-RECORDING
        17Operation Mode
        18Zooming
        19DANGER
        Video Light
        20Time Code
        (cont.)
        Recording From The Middle Of A Tape
        The time code is displayed only when TIME CODE is set to ON (
        The time code cannot be reset.
        During fast-forwarding and rewinding, the time code indication does not move smoothly.
        pg. 49, 50).
        When a blank portion is recorded on a tape
        Proper recording
        21Normal Playback
        Load a tape ( pg. 12).
        Shuttle Search:
        Still Playback:
        4
        /6.
        To Control The Speaker Volume . . .
        Pauses during playback.
        Allows high-speed search in either direction.
        Frame-By-Frame Playback:
        Slow-Motion Playback, Playback Special Effects and Playback Zoom
        Available only with the remote control (provided) ( pg. 59, 60).
        22 (cont.) Connections
        To TV or VCR
        B.Connection to a TV or VCR equipped only with A/V input connectors
        TV VCR
        A.Connection to a TV or VCR equipped with an S-VIDEO IN and A/V input connectors
        To TV or VCR
        TV VCR
        24 (cont.)
      - 25DIGITAL STILL CAMERA (D.S.C.) RECORDING & PLAYBACK
        D.S.C. RECORDING........................ 26 27
        D.S.C. PLAYBACK.......................... 28 36
        DIGITAL STILL CAMERA (D.S.C.) RECORDING & PLAYBACK
    - 26D.S.C. RECORDING
      - Basic Shooting (Snapshot)
        Picture Quality Mode Setting (
        Loading A Memory Card (
        Viewfinder Adjustment (
        Grip Adjustment (
        Power (
        You should already have performed the procedures listed below. If not, do so before continuing.
        pg. 8)
        pg. 10)
        pg. 14)
        SNAPSHOT MODE SELECTION
        SNAPSHOT RECORDING
      - 28Normal Playback
      - Auto Playback
        EXIT
        INDEX
        <
        >
      - 29INDEX Screen
        1: Index number
        F/S: Picture Quality
        : Protect icon
        Selected Image
      - 3010 / 50
        (cont.)
        Jump Playback
        <
        >
        <
        31Protecting Images
        TO PROTECT AN IMAGE
        TO REMOVE PROTECTION
        32 (cont.)
        >
        <
        Deleting Images
        TO DELETE THE DISPLAYED IMAGE
        TO SELECT AN IMAGE BY BROWSING IMAGES STORED IN MEMORY
        33TO DELETE ALL IMAGES
        34Setting Print Information (DPOF Setting)
        
        TO PRINT ALL STILL IMAGES (ONE PRINT FOR EACH)
        To Reset The Setting . . .
        (cont.)
        35TO PRINT BY SELECTING STILL IMAGES AND NO. OF PRINTS
        To Reset The No. Of Prints . . .
        To print images recorded on a tape, first dub them to a memory card (
        pg. 56).
        36Initialising A Memory Card
    - 37ADVANCED FEATURES
      - ADVANCED FEATURES
        FOR RECORDING ................................................ 38 45
        USING MENUS FOR DETAILED ADJUSTMENT.................. 46 51
        DUBBING ......................................................... 52 55
        USING THE REMOTE CONTROL UNIT .......................... 57 67
        SYSTEM CONNECTIONS ......................................... 68 69
        38Programme AE With Special Effects
        Night-Scope
        39When using SLOW, the image takes on a strobe-like effect.
        If the manual focus indicator blinks when SLOW is used, adjust focus manually and use a tripod.
        SPOTLIGHT has the same effect as 3 with the exposure control (
        pg. 44).
        (cont.) Fade/Wipe Effects
- 402
  - FADE/WIPE SELECTION ( , , , , , , , , and )
  - PICTURE WIPE OR DISSOLVE SELECTION ( , , , , , and )
  - 41Fader And Wipe Menu
  - 42 (cont.) Snapshot (For Video Recording)
    - This feature lets you record still images that look like photographs onto a tape.
    - SNAPSHOT MODE SELECTION
    - SNAPSHOT RECORDING
    - 43Auto Focus
    - Manual Focus
  - 44Exposure Control
  - Iris Lock
  - (cont.)
  - 45White Balance Adjustment
  - Manual White Balance Operation
    - 12..0125 17 30:
    - RE NEON SC LCD / TV UTOAIMETDAT E / TIME CODE CLOCK ADJ.
    - FFO NRETUR
    - Display Menu Screen
    - MENU/BRIGHT Wheel
    - Lock Button Power Switch
  - 46USING MENUS FOR DETAILED ADJUSTMENT
    - For Recording Menu
      - 1
      - Set the Power Switch to while pressing down the Lock Button located on the switch.
      - Press the MENU/BRIGHT wheel in. The Menu Screen appears.
      - desired function menu, and press it. The selected function menu appears.
      - Function menu setting depends on the function.
      - If you have selected WIPE/FADER, PROGRAM AE or W. BALANCE . . .
        ....see pg. 47.
      - If you have selected CAMERA, MANUAL, SYSTEM, DISPLAY or DSC
        (GR- DVL915/DVL715/DVL515 only)
      - . . .
        ....go to step 5.
        Rotate the MENU/BRIGHT wheel to select
        RETURN and press it twice. The Menu Screen closes. The icon represents END.
        Sub Menu
        Normal Screen
      - 47Menu Screen Explanations
        The CAMERA settings are effective when the Power Switch is set to both and .
        The MANUAL settings are effective only when the Power Switch is set to .
    - 48USING MENUS FOR DETAILED ADJUSTMENT
      - Menu Screen Explanations (cont.)
        The MANUAL settings are effective only when the Power Switch is set to .
        pg. 50).
        49/
        pg. 50). CLOCK ADJ. only appears when the Power Switch is set to .
        The DISPLAY settings are effective even when the Power Switch is set to .
        pg. 23, 52, 62).
    - 50USING MENUS FOR DETAILED ADJUSTMENT
      - For Playback Menu
        VIDEO
        The following procedure applies to all except
        1
        Synchro Comp (
        pg. 65).
        Set the Power Switch to while pressing down the Lock Button located on the switch.
        Press the MENU/BRIGHT wheel in. The Menu Screen appears.
        Rotate the MENU/BRIGHT wheel to select the desired function, and press it to display the Sub Menu.
        desired parameter and press it. Selection is complete.
        Rotate the MENU/BRIGHT wheel to select
        RETURN and press it twice to close the Menu Screen.
        REC MODE can be set when the Power Switch is set to or (
        pg. 13, 47).
        When S/AV INPUT is set to ON, camcorder playback cannot be viewed on the AV output.
      - (cont.)
        Menu Screen Explanations
        
        51PLAYBACK SOUND
        Menu Screen Explanations (cont.)
        MEMORY DISPLAY SYSTEM
        DISPLAY
        52[To use this camcorder as a player]
        pg. 59) in step 6.
        
        You can use Playback Zoom (
        pg. 60) or Playback Special Effects (
      - 53Dubbing From A VCR
        [To use this camcorder as a recorder: GR-DVL915/DVL715 only]
        It is recommended to use the AC Adapter as the power supply instead of the battery pack (
        pg. 9).
        Analogue signals can be converted to digital signals with this procedure.
        It is also possible to dub from another camcorder.
      - 54 (cont.)
      - Dubbing To Or From A Video Unit Equipped With A DV Connector (Digital Dubbing)
        [To use this camcorder as a player]
        To Use This Camcorder As A Recorder . . .
      - 55Dubbing Images Stored In A Memory Card To A Tape
      - 56Dubbing Images Recorded On A Tape To A Memory Card
      - (cont.)
        pg. 59).
        If an image recorded on the tape using the WIDE mode (
        pg. 48) is dubbed to a memory card, the WIDE mode identifying signal is not dubbed with it.
      - 57Installing The Battery
        59Slow-Motion Playback
        or
        During Slow-Motion Playback, press PAUSE
        or
        After SLOW
        to pause playback.
        Frame-By-Frame Playback
        To allow frame-by-frame search during video playback.
        NOTE:
        You can also engage Frame-By-Frame Playback from Still Playback by pressing SLOW
        repeatedly.
        Playback Special Effects
        pg. 42) are not available.
        60Playback Zoom
        Zoom can also be used during slow-motion and still playback.
        Due to digital image processing, the quality of the image may suffer.
      - 61Random Assemble Editing [R.A.Edit]
        SET REMOTE/VCR CODE
        You are now ready to try Random Assemble Editing.
        If the VCRs power does not come on in step 1, try another code from the VCR CODE LIST.
        If the remote control is not able to control the VCR, use the controls on the VCR.
        62MAKE CONNECTIONS
        
        For GR-DVL915/DVL715 Owners: Make sure to set S/ AV INPUT to OFF in the Menu Screen (
        pg. 50).
        For GR-DVL510/DVL410 Owners:
        ATTENTION FOR EDITING CABLE
        63SELECT SCENES
        1
        Turning off the camcorders power erases all registered Edit-In and Edit-Out points.
        64AUTOMATIC EDITING TO VCR
        pg. 20).
      - 65For More Accurate Editing
        DIAGNOSING VCR/CAMCORDER TIMING
        ADJUSTMENT OF VCR/CAMCORDER TIMING
      - 66 (cont.)
      - Audio Dubbing
      - 67Insert Editing
  - SYSTEM CONNECTIONS
- 683
  - OR
  - Connection To A Personal Computer
    - [A]Using USB or PC connection cable
    - [B] Using DV cable
      - [A]Using USB or PC connection cable
      - [B]Using DV cable
  - 69Connection To A Video Unit Equipped With A DV Connector
  - 70REFERENCES
    - REFERENCES
      - I T E M S N O T E S
  - 71DETAILS
  - 77USER MAINTENANCE
    - Cleaning The Camcorder
      - Avoid using strong cleaning agents such as benzine or alcohol.
      - Mould may form if the lens is left dirty.
      - When using a cleaner or chemically treated cloth refer to the cautions of each product.
    - After Use
    - 78 Controls, Connectors And Indicators
      - 79Controls
      - Connectors
      - Indicators
      - Other Parts
    - 80 Indications LCD Monitor/Viewfinder Indications During Video Recording Only
      - 12 4 56
        1234 5 6
      - 9 80
      - 7
      - 3
    - LCD Monitor/Viewfinder Indications During D.S.C. Recording Only (GR-DVL915/DVL715/DVL515 only)
    - 81LCD Monitor/Viewfinder Indications During Both Video And D.S.C. Recording
      - #
      - 8 9 0 !
      - 2
      - 1 3 45 7
      - 6 @
    - 82 Indications (cont.) LCD Monitor/Viewfinder Indications During Video Playback
      - 5
        10 / 24
        .
        7Displays the time code. ( pg. 50, 51)
        5Displays the date/time. ( pg. 50, 51) 6
        1 2 3 4
        765
    - LCD Monitor/Viewfinder Indications During D.S.C. Playback (GR-DVL915/DVL715/DVL515 only)
      - 1
      - 2Displays the directory and file name. ( pg. 28) 3
      - 4
      - 5Displays the date. ( pg. 28)
        B
        R .
        IG 0
        H
        T
      - 4
      - 23 1
        100 -
        0010
        Indications Function
    - 83Warning Indications
      - Indications Function
    - 84 Indications (cont.)
      - Video Light
        DANGER
  - 85CAUTIONS
    - Battery Packs
      - Recharging time is based on room temperature of 20C.
      - The lower the temperature, the longer recharging takes.
  - 86CAUTIONS
    - Cassettes
    - Memory Cards
    - LCD Monitor
    - Main Unit
    - 87How To Handle A CD-ROM
  - 88TERMS
    - F
    - G
    - I
    - J
    - L
    - M
    - N
    - A
    - B
    - C
    - D
    - E
    - 89P
    - R
    - S
    - T
    - U
    - V
    - W
    - Z
  - 90SPECIFICATIONS
    - Camcorder
      - For General
      - For Digital Video Camera
      - For Digital Still Camera (GR-DVL915/DVL715/DVL515 only)
      - For Connectors
    - 91AC Adapter AP-V10ED
- 92EN

92 pages2.75 Mb

EN
- INSTRUCTIONS
GR-DVL915 GR-DVL815 GR-DVL510 GR-DVL310
- DIGITAL VIDEO CAMERA
  - CONTENTS
- 2SAFETY PRECAUTIONS
  - CAUTION
    - The rating information and safety caution of the AC Adapter are on its upper and lower sides.
  - Dear Customer,
- 3IMPORTANT SAFETY INSTRUCTIONS
- 4SAFETY PRECAUTIONS
  - CAUTION!
  - Before recording an important scene . . .
  - 5PROVIDED ACCESSORIES
  - 6AUTOMATIC DEMONSTRATION
    - How To Attach The Lens Cap
    - 7GETTING STARTED
      - 8 (cont.) Power
        CHARGING THE BATTERY PACK
        For other notes, pg. 71
        9USING AC POWER
        The provided AC Adapter features automatic voltage selection in the AC range from 110 V to 240 V.
        pg. 71.
        For other notes,
        ATTENTION:
        Recording time is reduced significantly under the following conditions:
        Zoom or Record-Standby mode is engaged repeatedly.
        The LCD monitor is used repeatedly.
        The playback mode is engaged repeatedly.
        USING THE BATTERY PACK
        About Batteries
      - 10Grip Adjustment
      - Viewfinder Adjustment
      - Tripod Mounting
      - (cont.)
      - Shoulder Strap Attachment
      - 11Date/Time Settings
      - 12Loading/Unloading A Cassette
      - (cont.)
        *
        It takes a few seconds for the cassette holder to open. Do not apply force.
        To Protect Valuable Recordings . . .
      - 13Recording Mode Setting
      - 14 (cont.)
      - Picture Quality Mode Setting
        pg. 36.
        ATTENTION:
      - Loading A Memory Card
        To Unload A Memory Card . . .
        Be sure to use only SD Memory Cards marked or MultiMediaCards marked .
        Before using a new memory card, it is necessary to FORMAT the card.
    - 15VIDEO RECORDING & PLAYBACK
      - VIDEO RECORDING & PLAYBACK
        VIDEO RECORDING ....................... 16 20
        VIDEO PLAYBACK .........................21 24
        16Basic Recording
        For other notes, pg. 71
        JOURNALISTIC SHOOTING
        SELF-RECORDING
        17Operation Mode
        18Zooming
        19DANGER
        Video Light
        20Time Code
        (cont.)
        Recording From The Middle Of A Tape
        The time code is displayed only when TIME CODE is set to ON (
        The time code cannot be reset.
        During fast-forwarding and rewinding, the time code indication does not move smoothly.
        pg. 49, 50).
        When a blank portion is recorded on a tape
        Proper recording
        21Normal Playback
        Load a tape ( pg. 12).
        Shuttle Search:
        Still Playback:
        4
        /6.
        To Control The Speaker Volume . . .
        Pauses during playback.
        Allows high-speed search in either direction.
        Frame-By-Frame Playback:
        Slow-Motion Playback/Playback Special Effects (GR-DVL915/DVL815 only) and Playback Zoom
        Available only with the remote control (provided) ( pg. 59, 60).
        22Connections
        A.Connection to a TV or VCR equipped with an S-VIDEO IN and A/V input connectors
        B.Connection to a TV or VCR equipped only with A/V input connectors
        24 (cont.)
      - 25DIGITAL STILL CAMERA (D.S.C.) RECORDING & PLAYBACK
        D.S.C. RECORDING ....................... 26 27
        D.S.C. PLAYBACK......................... 28 36
        DIGITAL STILL CAMERA (D.S.C.) RECORDING & PLAYBACK
    - 26D.S.C. RECORDING
      - Basic Shooting (Snapshot)
        Picture Quality Mode Setting (
        Loading A Memory Card (
        Viewfinder Adjustment (
        Grip Adjustment (
        Power (
        You should already have performed the procedures listed below. If not, do so before continuing.
        pg. 8)
        pg. 10)
        pg. 14)
        SNAPSHOT MODE SELECTION
        SNAPSHOT RECORDING
      - 28Normal Playback
      - Auto Playback
        EXIT
        INDEX
        <
        >
      - 29INDEX Screen
        1: Index number
        F/S: Picture Quality
        : Protect icon
        Selected Image
      - 3010 / 50
        (cont.)
        Jump Playback
        <
        >
        <
        31Protecting Images
        TO PROTECT AN IMAGE
        TO REMOVE PROTECTION
        32 (cont.)
        >
        <
        Deleting Images
        TO DELETE THE DISPLAYED IMAGE
        TO SELECT AN IMAGE BY BROWSING IMAGES STORED IN MEMORY
        33TO DELETE ALL IMAGES
        34Setting Print Information (DPOF Setting)
        
        TO PRINT ALL STILL IMAGES (ONE PRINT FOR EACH)
        To Reset The Setting . . .
        (cont.)
        35TO PRINT BY SELECTING STILL IMAGES AND NO. OF PRINTS
        To Reset The No. Of Prints . . .
        To print images recorded on a tape, first dub them to a memory card (
        pg. 55).
        36Initializing A Memory Card
    - 37ADVANCED FEATURES
      - ADVANCED FEATURES
        FOR RECORDING ............................................ 38 45
        USING THE MENU FOR DETAILED ADJUSTMENT.......... 46 51
        DUBBING .....................................................52 55
        USING THE REMOTE CONTROL UNIT ..................... 56 67
        SYSTEM CONNECTIONS ..................................... 68 69
        38Program AE With Special Effects
        Night-Alive
        39SPOTLIGHT has the same effect as 3 with the exposure control (
        pg. 44).
        (cont.) Fade/Wipe Effects
- 402
  - FADE/WIPE SELECTION ( , , , , , , , , and )
  - PICTURE WIPE OR DISSOLVE SELECTION ( , , , , , and )
  - 41Fader And Wipe Menu
  - 42 (cont.) Snapshot (For Video Recording)
    - This feature lets you record still images that look like photographs onto a tape.
    - SNAPSHOT MODE SELECTION
    - SNAPSHOT RECORDING
    - 43Auto Focus
    - Manual Focus
  - 44Exposure Control
    - When shooting using reverse lighting or when the background is too bright.
    - When shooting on a reflective natural background such as at the beach or when skiing.
    - When the background is overly dark or the subject light.
    - To Return To Automatic Exposure Control . . .
    - To Brighten The Subject Quickly . . .
  - Iris Lock
    - When shooting a moving subject.
    - When shooting on a reflective natural background such as at the beach or when skiing.
    - When shooting objects under a spotlight.
    - When zooming.
    - To Return To Automatic Iris Control . . .
    - To Lock The Exposure Control And The Iris . . .
  - (cont.)
  - 45White Balance Adjustment
  - Manual White Balance Operation
    - Display Menu Screen
    - MENU/BRIGHT Wheel
    - Lock Button Power Switch
  - 46USING MENUS FOR DETAILED ADJUSTMENT
    - For Recording Menu
      - 1
      - Set the Power Switch to while pressing down the Lock Button located on the switch.
      - Press the MENU/BRIGHT wheel in. The Menu Screen appears.
      - desired function menu, and press it. The selected function menu appears.
      - Function menu setting depends on the function.
      - If you have selected WIPE/FADER, PROGRAM AE or W. BALANCE . . .
        ....see pg. 47.
      - If you have selected CAMERA, MANUAL, SYSTEM, DISPLAY or DSC
        (GR- DVL915/DVL815/DVL310 only)
      - . . .
        ....go to step 5.
        Rotate the MENU/BRIGHT wheel to select
        RETURN and press it twice. The Menu Screen closes. The icon represents END.
        Sub Menu
        Normal Screen
      - 47Menu Screen Explanations
        The CAMERA settings are effective when the Power Switch is set to both and .
        The MANUAL settings are effective only when the Power Switch is set to .
    - 48USING MENUS FOR DETAILED ADJUSTMENT
      - Menu Screen Explanations (cont.)
        The MANUAL settings are effective only when the Power Switch is set to .
        pg. 50).
        49/
    - 50USING MENUS FOR DETAILED ADJUSTMENT
      - For Playback Menu
        VIDEO
        The following procedure applies to all except
        1
        Synchro Comp (
        pg. 65).
        Set the Power Switch to while pressing down the Lock Button located on the switch.
        Press the MENU/BRIGHT wheel in. The Menu Screen appears.
        Rotate the MENU/BRIGHT wheel to select the desired function, and press it to display the Sub Menu.
        desired parameter and press it. Selection is complete.
        Rotate the MENU/BRIGHT wheel to select
        RETURN and press it twice to close the Menu Screen.
        REC MODE can be set when the Power Switch is set to or (
        pg. 13, 47).
        When S/AV INPUT is set to ON, camcorder playback cannot be viewed on the AV output.
      - (cont.)
        Menu Screen Explanations
        
        51PLAYBACK SOUND
        Menu Screen Explanations (cont.)
        MEMORY DISPLAY SYSTEM
        DISPLAY
  - 52DUBBING
    - Dubbing To Or From A VCR
      - [To use this camcorder as a player]
      - For GR-DVL915 Owners:
        To Use This Camcorder As A Recorder . . .
        After dubbing, set S/AV INPUT back to OFF.
        Analog signals can be converted to digital signals with this procedure.
        It is also possible to dub from another camcorder.
    - 53Dubbing To Or From A Video Unit Equipped With A DV Connector (Digital Dubbing)
      - [To use this camcorder as a player]
        To Use This Camcorder As A Recorder . . .
  - 54DUBBING
    - Dubbing Images Stored In A Memory Card To A Tape
    - (cont.)
    - 55Dubbing Images Recorded On A Tape To A Memory Card
      - pg. 59).
      - If an image recorded on the tape using the WIDE mode (
      - pg. 48) is dubbed to a memory card, the WIDE mode identifying signal is not dubbed with it.
      - A B
        For GR-DVL510/DVL310 Owners:
    - 56Installing The Battery (RM-V700U, optional)
    - Installing The Batteries (RM-V716U or RM-V715U, provided)
      - 58
      - *This function is unavailable with this camcorder. : RM-V700U only
        PAUSE
        PLAY
        )
        0
        9
        (
        (6)
        SLOW Forward Button EFFECT ON/OFF
        SLOW Rewind Button EFFECT
        Remote sensor
        )
        0
        
        9
        (
      - 59Slow-Motion Playback
        To allow slow-speed search in either direction during video playback.
        4
        1)To start playback, press PLAY (
        or
        9
        ) repeatedly for forward or SLOW (
        0
        During Slow-Motion Playback, press PAUSE
        or
        After SLOW
        4
        0
        or
        9
        1)To change from normal to Slow-Motion Playback, press SLOW (
        ).
        to pause playback.
      - Frame-By-Frame Playback
        To allow frame-by-frame search during video playback.
        1)To change from normal to Frame-By-Frame Playback, press SLOW (
        ) repeatedly for reverse. Each time it is pressed, the frame is played back.
        NOTE:
        You can also engage Frame-By-Frame Playback from Still Playback by pressing SLOW
        repeatedly.
      - Playback Special Effects
        To allow you to add creative effects to the playback image.
        pg. 42) are not available.
        PLAYBACK EFFECT Select Menu
        RM-V716U (Provided with GR-DVL915/DVL815 only)
      - 60Playback Zoom
        Zoom can also be used during slow-motion (GR-DVL915/DVL815 only) and still playback.
        Due to digital image processing, the quality of the image may suffer.
    - 61Random Assemble Editing [R.A.Edit]
      - For GR-DVL510/DVL310 Owners:
      - SET REMOTE/VCR CODE
        You are now ready to try Random Assemble Editing.
        If the VCRs power does not come on in step 1, try another code from the VCR CODE LIST.
        If the remote control is not able to control the VCR, use the controls on the VCR.
      - 62MAKE CONNECTIONS
        A JVC VCR equipped with a remote pause connector . . .
        A JVC VCR not equipped with a remote pause connector but equipped with an R.A. EDIT connector . . .
        A VCR other than above . . .
      - SELECT SCENES
- 635
- 8
- 9
  - 1
  - Turning off the camcorders power erases all registered Edit-In and Edit-Out points.
  - 64AUTOMATIC EDITING TO VCR
    - pg. 20).
  - 65For More Accurate Editing
    - DIAGNOSING VCR/CAMCORDER TIMING
    - ADJUSTMENT OF VCR/CAMCORDER TIMING
  - 66 (cont.)
  - Audio Dubbing
  - 67Insert Editing
  - SYSTEM CONNECTIONS
- 683
  - OR
  - Connection To A Personal Computer
    - [A]Using USB or PC connection cable
    - [B] Using DV cable
      - For GR-DVL915/DVL815/DVL510 Owners:
      - [A]Using USB or PC connection cable
      - [B]Using DV cable
  - 69Connection To A Video Unit Equipped With A DV Connector
  - 70REFERENCES
    - REFERENCES
      - I T E M S N O T E S
  - 71DETAILS
    - - 76When the image is printed from the printer, a black bar appears at the bottom of the screen.
      - When the camcorder is connected via the DV connector, the camcorder does not operate.
      - The memory card cannot be removed from the camcorder.
      - This is not a malfunction.
      - The DV cable was plugged/ unplugged with power turned on.
      - By recording with DIS activated ( pg. 47) this can be avoided.
      - Turn the camcorders power off and on again, then operate it.
      - Push in the memory card a few more times ( pg. 14).
  - 77USER MAINTENANCE
    - Cleaning The Camcorder
      - Avoid using strong cleaning agents such as benzine or alcohol.
      - Mold may form if the lens is left dirty.
      - When using a cleaner or chemically treated cloth refer to the cautions of each product.
    - After Use
    - 78 Controls, Connectors And Indicators
      - 79Controls
      - Connectors
      - Indicators
      - Other Parts
    - 80 Indications LCD Monitor/Viewfinder Indications During Video Recording Only
      - 12 4 56
        1234 5 6
      - 9 80
      - 7
      - 3
    - LCD Monitor/Viewfinder Indications During D.S.C. Recording Only (GR-DVL915/DVL815/DVL510 only)
    - 81LCD Monitor/Viewfinder Indications During Both Video And D.S.C. Recording
      - #
      - 8 9 0 !
      - 2
      - 1 3 45 7
      - 6 @
    - 82 Indications (cont.) LCD Monitor/Viewfinder Indications During Video Playback
      - 5
        DEC
        10 / 24
        7Displays the time code. ( pg. 50, 51)
        5Displays the date/time. ( pg. 50, 51) 6
        1 2 3 4
        765
    - LCD Monitor/Viewfinder Indications During D.S.C. Playback (GR-DVL915/DVL815/DVL510 only)
      - 1
      - 2Displays the directory and file name. ( pg. 28) 3
      - 4
      - 5Displays the date. ( pg. 28)
        BRI GHT
      - 4
      - 23 1
        100 -
        0010
        25 01
        Indications Function
    - 83Warning Indications
      - Indications Function
    - 84 Indications (cont.)
      - Video Light
        DANGER
      - General Battery Precautions
  - 85CAUTIONS
    - Battery Packs
      - Recharging time is based on room temperature of 20C (68F).
      - The lower the temperature, the longer recharging takes.
    - Cassettes
  - 86CAUTIONS
    - Memory Cards
    - LCD Monitor
    - Main Unit
    - 87How To Handle A CD-ROM
  - 88TERMS
    - F
    - G
    - I
    - J
    - L
    - M
    - N
    - A
    - B
    - C
    - D
    - E
    - 89P
    - R
    - S
    - T
    - U
    - V
    - W
    - Z
  - 90SPECIFICATIONS
    - Camcorder
      - For General
      - For Digital Video Camera
      - For Digital Still Camera (GR-DVL915/DVL815/DVL510 only)
      - For Connectors
    - 91AC Adapter AP-V10U
- 92EN

Also you can find more JVC manuals or manuals for other Photography.