Lucent Technologies TM-4500 manuals

Lucent Technologies TM-4500 Installation Instructions

20 pages280.44 Kb

45" Wood Burning Fireplaces P/N 850,045M REV. N/C 01/2007
TM-4500
MODEL
- RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
INSTALLATION INSTRUCTIONS
ELITE SERIES
- 2TABLE OF CONTENTS
- IMPORTANT: PLEASE READ AND UNDERSTAND THESE RULES TO FOLLOW FOR SAFETY.
  - TOOLS AND BUILDING SUPPLIES NORMALLY REQUIRED
    - Figure 1
- 3TYPICAL INSTALLATION
  - PRECAUTIONS
  - INTRODUCTION General Information
  - CHIMNEY CLEARANCES AND MANTEL HEIGHT REQUIREMENTS
  - CHIMNEY SYSTEM
  - Figure 2
  - Figure 3
  - Figure 5
  - 4LOCATION OF FIREPLACE
    - Figure 3
    - Figure 2
  - Chase Enclosure
  - ASSEMBLY OUTLINE Before You Start
    - Figure 4
    - Note: Do not insulate the chase cavity with blown or fill type insulation materials.
  - CHIMNEY HEIGHT
  - 5ASSEMBLY STEPS
    - K factor of .84 or less 40" W x 40" H
    - Figure 6
    - Figure 7
    - Fig- ure 1
  - PRE-INSTALLATION NOTES
    - Figure 5
  - INSTALLING THE FIREPLACE
    - Figures 6 and 7
    - Note: Safety strips are not required when fire- place rests on a noncombustible surface.
  - FIREPLACE CLEARANCES
    - Note: Install the hearth extension only as illustrated.
    - see Figures 8 and 9
    - Figures 12 through 15
    - SEE FIGURE 11
    - Figure 11
    - Figure 10
    - Note: The Z type safety strip is not supplied.
    - Figure 8
    - Figure 9
- 6FIREPLACE SPECIFICATIONS
  - 7Note: The framed depth, 28
  - Figure 17
  - Figure 14
  - Figure 13
  - Figure 12
  - Figure 16
  - Figure 15
  - 8For Canadian Installations Proceed with Steps 69
  - INSTALLING THE CHIMNEY SYSTEM
  - 9For Canada Only
  - 10TEN-FOOT RULE SUMMARY
  - 11MULTIPLE TERMINATIONS
    - Figure 34
    - Figure 42
    - Figure 39
    - Figure 38
    - Figure 37
    - Figure 36
    - Figure 35
    - Figure 34
  - FTF10 CHIMNEY COMPONENT CALCULATIONS
  - SPECIAL OFFSET INSTRUCTIONS
    - Figure 38
    - Figure 40
  - 12OFFSET CALCULATIONS
    - Figure 39
    - Figure 37
    - Figure 36
    - Figure 27
    - Figures 21 and 22
- 13FTF10 VERTICAL ELEVATION CHART
- FTF10 OFFSET ELEVATION CHART
  - 14CHIMNEY 30 OFFSET THROUGH FLOOR OR CEILING
    - Figure 42
    - Figure 43
    - Figure 41
    - Figures 42 and 43
  - INSTALLING OFFSETS
    - Figure 44
    - Figure 40
  - Offset Elbow Assembly
  - Return Elbow Assembly
  - OPTIONAL EQUIPMENT CONSIDERATIONS Combustion Air Kits
    - Figure 44
    - Note: Do not terminate combustion air kit in attic space under any circumstances.
  - 15FTF10-TMS Termination Shroud
    - Figure 45
    - Figure 46
    - Figure 45
    - Figures 45 and 46
  - Glass Doors
  - GAS LINE CONNECTION
  - Vent Free Appliances
  - COLD CLIMATE INSULATION
  - FIREPLACE FINISHES Mantels and Trim
    - Figure 47
    - Table 1
    - Note:
  - 16Hearth Extensions and Wall Shields
    - Figure 48 )
    - Page 17
    - Figure 47
  - Methods of Determini
    - Table 1
    - 17Figure 48
    - Example:
    - brick
    - mortar
    - marble
    - mortar
    - Figure 50 Figure 49
  - FINISH TO YOUR TASTE
    - Note:
    - Figure 50
  - INSTALLATION COMPONENTS
  - 18SEE FIGURE 49
    - ).
    - 19INSTALLATION COMPONENTS