Panasonic PT-ST10E manuals

Computer Equipment > Projector

When we buy new device such as Panasonic PT-ST10E we often through away most of the documentation but the warranty. Very often issues with Panasonic PT-ST10E begin only after the warranty period ends and you may want to find how to repair it or just do some service work. Even oftener it is hard to remember what does each function in Projector Panasonic PT-ST10E is responsible for and what options to choose for expected result. Fortunately you can find all manuals for Projector on our side using links below.

Panasonic PT-ST10E Manual

19 pages3.36 Mb

2Contents
3Request Regarding Security
What you can do
Check your computer
- Necessary environment for computers to be connected
Connecting with Wired LAN
- Turn on the computer.
41
- Make the network setting according to your system administrator.
2
- Network setting of the projector
  - Displaying the NETWORK menu
    - Press the [MENU] button on the projector.
51
- Select [NETWORK] with the [] buttons.
2
- Press the [ENTER] button
3
- NETWORK
61
2
3
- NAME CHANGE
  - You can change the projector name on the network.
  - If you turn [ON] the [NETWORK CONTROL], WEB control, PJLink and Command control are available.
  - Select [NAME CHANGE] in the NETWORK menu and press the [ENTER] button.
71
- LANGUAGE PROJECTOR SETUP SECURITY NETWORK
- POSITION DISPLAY OPTION
- PICTURE
2
- the [ENTER] button to enter the projector name.
- Select [OK] with the [] buttons and press the
3
- Select [CANCEL] to undo the changes.
- NETWORK CONTROL
  - Set it to ON, if you want to control the projector from a computer that is network-connected.
  - Select [NETWORK CONTROL] in the NETWORK menu.
1
- LANGUAGE PROJECTOR SETUP SECURITY NETWORK
- POSITION DISPLAY OPTION
- PICTURE
- Select [ON] or [OFF] with the [] buttons.
2
- STATUS
  - Select [STATUS] in the NETWORK menu and press the [ENTER] button.
- INITIALIZE
  - Select [INITIALIZE] in the NETWORK menu and press the [ENTER] button.
81
2
- button.
- Using WebBrowser
91
2
4
1
2
3
- Enabling JavaScript
- Open <Internet Properties> window.
101
- Click the [Security] tab and set the security level to [Default Level], or select [Custom
2
- Accessing from the WebBrowser
  - Start up the WebBrowser, and enter the IP address set to the projector.
1
- Enter the User name and the Password.
2
- Click [OK].
3
- 11Monitor information window
  - Projector status
  - Network status
  - If [FAILED] appears
121
2
133
- Click [Submit].
4
- Adjust clock
- 14E-mail set up
- Ping test
- Authentication set up
- Command port set up
- 16Change password window
  - Password settings
- Switching Languages
- 17Using PJLink protocol
  - Applicable commands
    - PJLink security authentication
- 18Glossary
- Trademarks

Also you can find more Panasonic manuals or manuals for other Computer Equipment.