Contents
Main
Notice
Preface
Symbols
Technician Notes
Serial Number
Locating Additional Information
Specifications
System Interrupts
System DMA
System I/O Address
Page
Presario 1600 Series
Introduction
Battery Pack Operating Time
Increasing Battery Pack Operating Time
Cards vary widely. Some cards drain the battery pack very rapidly.
Minimizing the Energy Required
Maximizing the Energy Stored
Page
Connector Pin Assignments
Page
Electrostatic Discharge
Generating Static
Service Considerations
Tool and Software Requirements
Screws
Preparing the Computer for Disassembly
System Unit
System Boards
Display Assembly
Page
Miscellaneous Cable Kit
Miscellaneous Hardware Kit
Miscellaneous Plastics Kit
Miscellaneous Parts
Documentation and Software
Cables and Connectors (main page)
Models 1683, 1685 & 1692, 1687 & 1694, 1688, 1690 & 1693,
zif-cable.gif (10259 bytes)
ZIF Connectors
Removing a ZIF Cable
Models 1683, 1685 & 1692, 1687 & 1694, 1688, 1690 & 1693,
Hard Drive Ribbon
Back to Cables and Connectors main page.
Compaq Presario 1600 Series
Models 1683, 1685 & 1692, 1687 & 1694, 1688, 1690 & 1693, CTO
DVD or CD Drive Ribbon
The ribbon cable position for the DVD or CD drive ribbon.
Back to Cables and Connectors main page.
Compaq Presario 1600 Series
Models 1683, 1685 & 1692, 1687 & 1694, 1688, 1690 & 1693, CTO
Diskette Drive Ribbon
The ribbon cable position for the diskette drive.
Back to Cables and Connectors main page.
Speaker Cable Assembly
The cable position for the speaker assembly.
Back to Cables and Connectors main page.
Removing the Battery Pack (step 1)
1.
Removing the Battery Pack (step 2)
Removing the Palmrest Cover with Touch Pad
1.
2.
3.
Removing the Palmrest Cover with Touch Pad (steps 4 & 5)
4.
5.
Removing the Palmrest Cover with Touch Pad (step 6)
6.
To replace the palmrest cover with touch pad, reverse the previous procedures.
Heatspreader Removal (steps 1 - 3)
Heatspreader Removal (step 4)
Removing the Keyboard
Removing the Processor
1.
2.
3.
4.
Replacing the Processor
(Removing the Processor)
1.
2.
Removing the Hard Drive (steps 1 - 4)
1.
2.
3.
4.
Removing the Hard Drive (step 5)
5.
Removing the Hard Drive (step 6)
6.
Removal of DVD or CD Drive
1.
2.
3.
4.
Removal of DVD or CD Drive (step 6)
6.
Removal of DVD or CD Drive (step 7)
7.
Removing the Battery Charger Board
1.
2.
3.
4.
Removing the Modem (steps 1 - 5)
1.
2.
3.
4.
Removing the Modem (step 6)
6.
Removing the Display Panel Assembly
1.
2.
3.
4.
Removing the Display Panel Assembly (step 7)
7.
Removing the Display Panel Assembly (step 8)
8.
Removing the Display Panel Assembly (step 9)
9.
Removing the Display Panel Assembly (steps 10 -11)
10.
11.
Removing the Upper CPU Cover
Removing the Upper CPU Cover (steps 8 - 9)
Removing the Speaker Assembly
1.
2.
3.
4.
Removing the Diskette Drive
1.
2.
3.
4.
Fan Assembly
1.
2.
3.
4.
Fan Assembly
9.
System Board
Removing the System Board (step 15)
15.
Removing the System Board (step 16)
16.
Removing the System Board (step 17)
17.
Removing the System Board (step 18)
18.
Page
Dip Switch Settings
Memory Module
1.
2.
3.
Next Step
Removing the Memory Module (step 4)
4.
Return
Preliminary Steps
Page
Compaq Diagnostics
Computer Checkup (TEST)
View System Information (INSPECT)
Contacting Compaq Support
Diagnostic Error Codes
2.
3.
2.
3.
2. 3.
4.
5.
2.
3.
4.
2.
Hard Drive Test Error Codes
2.
3.
4.
1.
2.
3.
1.
2.
3.
2.
3.
4.
2.
3.
4.
5.
Solving Minor Problems
Solving Audio Problems
Solving Battery Pack and Battery Gauge Problems
Models and Features
Controls and Lights
Front Bezel Lights
Front Bezel Buttons
Left Side Components
Right Side Components
Underside of Unit
Rear Components
Power Management for Windows 98
Pow
er Management Settings
Tab: Alarms::
Tab: Power Meter: Tab: Advanced