Compaq 1685, 1687, 1694, 1683, 1688, 1693, 1692, 1690 manual Dip Switch Settings, System board

Presario 1600 Series

Models: 1683, 1685, 1687, 1688, 1690, 1692, 1693, and 1694

Before You Begin	Specifications	Parts Catalog
Removal Sequence	Troubleshooting	Battery Operations
		Index
Product Description	Pin Assignments

Removal and Replacement

Prior to conducting any removal and/or replacement procedures, you should IMPORTANT: review and fully understand the section titled "Before You Begin".

Removal	Dip Switch Settings
Sequence
Cables and	Click here for more dip switch settings.
Connectors
Battery Pack				CAUTION: Only change settings 1-5on SW1 . Settings 6-10
Palmrest				vary by model and should not be changed when
Cover with				replacing the system board. Ensure the dip switch
Touch Pad				voltage settings (SW1 and SW3 ) on the system
Heatspreader				board are correct for the computer model and
				processor voltage marked on the processor chip. If the
Keyboard
				system board dip switch voltage settings are not
Processor
				correct, damage may occur to the computer and/or
Hard Drive
				system board.
DVD or
CD Drive
Battery
Charger
		NOTE:	The black area on the dip switch indicates the position of the switch.
Board
Modem
Display Panel
Assembly
Upper CPU
Cover
Speaker
Assembly
Diskette
Drive
Fan Assembly
System Board
Dip Switch
Settings
Memory
Module